Testing and Predicting the Movement of a Drilled Shaft in New Mexico
The New Mexico State Highway and Transportation Department (NMSH&TD) have been using drilled shafts for supporting bridges in the State of New Mexico. Several drilled shafts were...
Ultrafine Cement Tests and Drilling Warm Springs Dam
Ultrafine cement was chosen by the Corps of Engineers for tertiary grouting the Warm Springs Dam because of its ultrafine particle size, low settlement, medium viscosity and longevity....
A Review of Drilling and Grouting Methods for Existing Embankment Dams
With the increasing emphasis being placed on dam rehabilitation and repair, more dam engineers are faced with the need to interface with drilling and grouting specialists. Regretfully,...
Diffusion of Carbon Dioxide Through Layers of the Unsaturated Zone at Yucca Mountain
The estimation of diffusive transport of gases through tuffs is important in order to asses the Yucca Mountain as an environmentally safe and acceptable repository for spent fuel and high-level...
Core and Reaming Bit Studies in Yucca Mountain Tuffs
The Site Characterization Project is a major part of the work in determining the suitability of Yucca Mountain as a potential high level waste repository. Over 100 exploratory drill holes...
New Wells Safeguard Scenic Tahoe
Surface water for drinking and for snow-making is becoming scarce in the Lake Tahoe region, along the California and Nevada border. New Environmental Protection regulations regarding surface...
Coastal Management and Ocean Industries in East Germany, from Central Planning Ineffectiveness Towards Local and Regional Development Strategies
In so far, the preconditions for the implementation of decentralized development tools both in coastal management and in ocean industries may be quite ideal in East Germany: there is the...
Environmental Compliance and Offshore Oil and Gas Exploration and Production
The economic impacts of multiple environmental regulations of offshore oil and gas exploration and production are examined using an integrated, investment-production-regulatory model developed...
The Whole Picture: Federal Statutory and Regulatory Authorities Which Govern Oil and Gas Activities on the Alaskan Outer Continental Shelf
Oil and gas activities conducted on the Alaska Outer Continental Shelf (OCS) are subject to multiple Federal laws which result in safe operations and environmental protection. Lessees...
Resource Extraction Activities in the Coastal Zone?The Impact of Offshore Oil Production on Coastal Communities
There are few studies that examine the impact of offshore oil extraction on social problems, educational attainment and economic health of communities. The results of this study demonstrate...
An Ongoing Field Study to Evaluate the Impacts and Direct Effects of Offshore Dreding Activities on Benthic Organisms
Instrumentation and sampling involve box coring, otter trawling, the use of a towed sled carrying video camera, and a sidescan sonar device. The baseline collection phase of the study...
Drilling with Direction
Norfolk, Va.'s 48 in. diameter raw water main crosses three rivers in its 52,000 ft route. At the Elizabeth River, an aerial or subaqueous crossing was not feasible, so a...
Drilled Shaft Friction Evaluation via Pullout Tests
The history, development, and field test results of a small-scale 'pullout' test to assess the skin friction (fsu) for drilled shafts socketed in...
Load Testing of Permanently Cased Drilled Shafts Founded in Hartford Shale
The axial and lateral load testing of three, 30 inch (76cm) diameter, permanently cased drilled shafts is analyzed herein. The prototype shafts were founded in (or on) Hartford Shale bedrock,...
Side Resistance of Drilled Shafts in the Denver and Pierre Formations
Results of load tests on drilled shaft foundations in Upper Cretaceous shales are described and evaluated. Three load tests were conducted on shafts in the Denver Formation, in Denver,...
Mass and Energy Tradeoffs of Axial Penetration Devices on Lunar Soil Simulant
Axial penetration of the lunar surface was performed to collect soil samples with drive tubes and drill cores on the six successful Apollo missions. Although the pile-driving and drill...
In Situ Recovery of Water from Dormant Comet Cores & CI Carbonaceous Chondrites
Water and volatiles may be produced by drill holes into dormant comet cores or class CI or CM asteroids. This is modeled after in-situ mining as in the Frasch process sulfur mines of the...
The Transport and Fate of Drilling Muds
The disposal of drilling muds from offshore oil platforms is of concern because of the potential effects of pollution from these muds. Both drilling muds and fine-grained bottom sediments...
Feasibility Study of Petroleum Development in the Ross Sea, Antarctica
This paper discusses the viability of Antarctic petroleum development and estimates when Antarctic oil production could become economically feasible. The analysis is based on a hypothetical...
Dry Drilling and Coring Development for Unsaturated Zone Studies
Two areas of major difficulty associated with characterization of any unsaturated zone are the conventional drilling and coring processes used to acquire the samples. These processes are...
Return to search