Analysis of Berth Operability by Utilization of Agitation Models
Agitation models are utilized in order to predict the operability of berths for ship unloading purposes. Usually, in such models all ship displacements are measured and when one of them...
Case Studies of Displacement-Induced Fatigue
The potential for displacement-induced cracking is a result of the co-existence of two conditions: an abrupt change in stiffness and a periodic force opposing it. Case studies of retrofitted...
Practical Modeling of Bar Slippage in R/C Joints
A procedure based on the displacement method of analysis has been developed for analyzing the behavior of beam reinforcement crossing the interior beam-column connections under seismic...
Qualitative Physics and the Prediction of Structural Behavior
A key need in the application of expert systems to structural engineering design is the ability to predict structural deformation and stresses in the absence of a quantitative model. The...
Strengthening of a Multi-Story Building with Deflection Constraints
Occasionally the existing structural or nonstructural systems of a building being strengthened require the imposition of deflection constraints or limits in order to avoid an undesirable...
Modal Analysis of Random Vibration with Hysteresis
A model for the zero or non-zero mean random vibration response of hysteretic plane frames is summarized, in which the plane frame is idealized as a series of elastic sub-elements connected...
Hypars and Wood Shells?The Boston College Recplex
For the past twenty years, we have been involved in the design and construction of intermediate span wood hyperbolic paraboloid. During that time the spans have ranged from 50 ft. to 200...
Designing for Shock Resistance
If a product or structure is subject to shock loadings, and is unable to take them without unacceptable damage, it must be insulated from the shock. The decision may be to redesign the...
Triaxial Compression Testing of Ice
An understanding of the confined compressive strength of ice is needed to develop constitutive equations and failure criteria for analytical ice-structure interaction models. Procedures...
Multi-Truss Design for Tower
A modified structural steel system of outrigger trusses and belt trusses bolster the 54-story Equitable Tower West. Located in New York City, the building's structural system...
Application of Displacement of Discontinuity Methods in Underground Mine Design
Displacement discontinuity methods for stress analysis, pioneered by Starfield and Crouch (see, for example, Starfield and Crouch, 1972; Crouch, 1976; and Crouch and Starfield, 1983),...
Effect of Shallow Trench Construction on Cast Iron Pipelines
This paper summarizes the results of three-dimensional finite element analyses to evaluate the strains and displacements sustained by 4, 6, and 8-in. (100, 150, and 200 mm)-diameter cast...
Field Burial Tests of Corrugated Double Wall PVC Pipe
A new lightweight PVC pipe, consisting of a smooth inner wall and a corrugated outer wall, has been introduced in the U. S. sanitary sewer market in 4 through 10 in. diameters. Field burial...
Investigation of the Long-Term Creep Modulus for Buried Polyethylene Pipes Subjected to Constant Deflection
The tests reported in this paper are simulating the stress relaxation in constantly deflected pipe rings of various high density and medium density polyethylene grades. The pipe rings...
Long Term Deflection of Buried Plastic Sewer Pipes
During the 70's and the early 80's a research program has been carried out in Sweden regarding the long term behaviour of buried plastic pipes. The program has...
Numerical Simulation of Soil-Pipeline Interaction in a Ground Subsidence Zone
In this paper, the flexural interaction between a buried pipeline and the surrounding soil is examined by employing a combined boundary element-finite element scheme. The flexural interaction...
Tunnelling in Soil and Rock
The relationship between tunnel design and construction is covered with emphasis on case histories of field measurements and performance. A general report emphasizes the importance of...
State-of-the-Art of Development of Floor Spectra
Floor spectra are used as seismic inputs for the design and qualification of subsystems and equipment. Until very recently, the time history analyses with single acceleration time history...
Temperature Effects on Lasers
While lasers have markedly improved the accuracy of engineering, air temperature gradients can reduce that drastically. Based on a sewer project that used lasers to align all the pipe,...
Return to search