Using a Small Satellite Bus As a Dedicated Platform for On-Orbit CSI Experiments
Control-Structure Integration (CSI) technology will be needed for the success of many future space missions, however, this technology will not be seriously considered for use by program...
Use of GPS for Tethered Satellite Position Determination
This paper provides a description of the potential application of GPS to determine the position of a tethered satellite with respect to the Space Shuttle. Relative positioning is performed...
Interactions Between the Space Station Freedom Attitude Control System and Space Shuttle Remote Manipulator Controller During On-Orbit Assembly Operations
This paper presents the results of dynamics and control interaction analyses involving the Space Shuttle Orbiter, the Shuttle Remote Manipulator System (SRMS), and the Space Station Freedom...
The Effect of Mobile Transporter Motion on the Space Station Attitude Control System
The effect of Mobile Transport (MT) motion on Space Station stability and the performance of the Attitude Control System (ACS) using Control Momentum Gyros (CMGs) is assessed. Analysis...
Energy Analysis of High Temperature Lunar Manufacturing Processes
This paper presents an energy analysis methodology to optimize the power system requirements for high temperature manufacturing processes on the moon. Power requirement and power system's...
SemiActive Structural Control: A Low Cost Fix for An Infrastructure at Risk
There is increasing societal pressure on the engineering profession to develop cost effective methods to extend the service life of the civil infrastructure. While the degradation of the...
Discontinuous Control of Seismic-Excited Nonlinear and Hysteretic Structures
Based on the theory of variable structure system (VSS) or sliding mode control (SMC), discontinuous control methods are presented for application to seismic-excited nonlinear civil engineering...
An Application of a Coulomb Damped Mass Device
A new, passive, dissipation device which utilizes Coulomb friction to reduce horizontal structural motions is adapted to an actual vertical vibration problem. An analysis by numerical...
A Self-Balancing Laminate
A self balancing wood laminate has been developed based on the principle of orthotropic elasticity. Lumber is cut into three sections in the flatwise plane and each side member is turned...
High Strength Shotcrete and Concrete on the SSC Project
This paper addresses the technical aspects related to the use of high strength shotcrete and concrete on the Superconducting Super Collider (SSC) project. 7,000 psi shotcrete and 8,000...
Damping Systems for Controlling Wind Induced Motions of Structures
This paper presents the state-of-the-art in damping systems for controlling wind induced motion of structures and their applications in the U.S. and Japan. Both passive and active systems...
Seismic Upgrades Using Energy Dissipation Devices
This paper presents a model for developing comparative seismic rehabilitation schemes for essential facilities using both conventional techniques and passive control devices. Essential...
Structural Failure and Quality Assurance of Space Frames
Space frame has been developed rapidly in China and used to wide extent to cover various types of buildings. The large scale of application will unavoidably cause quality problems. Damages...
Dynamic Characteristics of Translational Lattice Domes
The feasibility of using lattice domes of various shapes generated by translating a variety of parametric polygons is illustrated and the dynamic characteristics of these lattices determined....
Continuous Pulse Control of Structures with Material Nonlinearity
A control method is presented for reducing the dynamic response of structures in the inelastic material range using a control force from an active control system. The proposed method of...
Active Control of Axial Forces in Beam String Space Frames
The present work discusses a formulation for active control of axial forces of strings in beam string structures to dynamically and/or statically reduce the responses, and proves both...
Innovations in Major Suspension Bridge Design
Before the Tacoma disaster, the trend in bridge-building is on increasing slenderness. But since its occurrence, a high degree of aerodynamic stability is required. Presented are designs...
Some Applications of Neural Networks in Structural Engineering
After a brief discussion of neural networks and their potential engineering applications, the author's on-going research in application of neural networks in structural engineering will...
Timing Analysis of a Multiprocessor Architecture for Active Control
This paper describes how real-time multiprocessor systems, such as those required for active structural control, can be developed to satisfy timing requirements on hardware and software....
Optimization of Controlled Structures: Using
This paper presents the algorithm for the design of a controlled structure in which the structural and control systems are designed simultaneously. The problem is posed as an optimization...
Return to search