Your Numerical Model Begins at the Site Investigation — Phase Improving the Suitability of Numerical Geotechnical Modeling
The success of an advanced geotechnical numerical analysis depends foremost on a thorough geologic and geotechnical understanding of the site, and thus the geometric definition and adequacy of input parameters...

Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...

Hydrologic and Hydraulic Design Methods
Computational methods for hydrologic analysis, hydraulic functions, and treatment capacity of permeable pavements vary depending on the complexity of the design and level of detail in...

Making Big Data Work for You and Your Project: A 3-D Geotechnical Model is a Smart Way to Work
Modeling the stratigraphy beneath a site and assigning soil and rock properties are important steps in geotechnical engineering. Geotechnical engineers often need to model ground conditions...

BIM in Geotechnics: The Benefits of Including Geotechnical Data in Building Information Modelling
Building Information Modelling (BIM) is becoming increasingly common around the world on building and civil engineering projects, but what are the benefits to geotechnical engineers and...

Geo-Congress 2014
Technical Papers and Keynote Lectures
Proceedings of the 2014 Geo-Congress, held in Atlanta, Georgia, February 23-26, 2014. Sponsored by the Geo-Institute of ASCE. GSP 234, Geo-Congress...

Hybrid Modelling of Seismic Structure Interaction

Mathematical Modelling of Intermediate Trusses

A Fault-Rupture Propagation Model for Ground Motion Simulation

Numerical Modeling Applications in Offshore Petroleum Developments

Hydrologic Modeling in 2050: Knowledge Requirements in a Multi-Nonstationary Environment

Groundwater Hydrology in 2050

Design Wave (Including Scott-Wiegel Wave Spectrum Model)

Cyclic Static Model Pile Tests in a Centrifuge

3-D Hydraulic Model of Waves Generated by Displacements

Cooling by Ocean Water: Model/Field Comparison

Geotechnical Earthquake Engineering Research Using a Large Centrifuge

Constitutive Models: Tools for Advanced Analysis of Geotechnical Problems

Rapid Prototyping of Computer Models to Characterize Discontinuous Rock Masses

Groundwater Flow Model Development at the Nevada Test Site
The Underground Test Area Project (UGTA) of the National Nuclear Security Administration.s Nevada Site Office is in the process of assessing and developing regulatory decision options...





Return to search