Risk Acceptance Criteria for Performance-Oriented Design Codes
A general basis for the determination of 'acceptable risks' needs to be established to facilitate the development of risk-based performance-oriented design Codes....

Present and Future Developments in Steel Design Codes
Steel structures design codes with load and resistance factors (or 'partial factors') which are based on first-order probabilistic concepts are now in use in...

LRFD for Engineered Wood Construction: ASCE Pre-Standard, Wood Industry Initiative
The structural wood community in the United States is in the process of developing a reliability-based consensus Load and Resistance Factor Design (LRFD) standard for engineered wood construction....

Reliability Bases for Codes for Design of Reinforced Concrete Structures
The American Concrete Institute Standard 318, Building Code Requirements for Reinforced Concrete, has permitted the design of reinforced concrete structures in accordance with limit state...

Limit States Design in Masonry
This paper reviews some aspects of limit states design for masonry structures based primarily on experience with a new Canadian code. Steps in an advanced second order safety index analysis...

A Doubling Design: Rochester's Expanding Airport
Few projects offer greater design challenges or pose more critical construction complexities than a new air passenger terminal, especially when that new terminal must be built on land...

Structural Safety and Reliability
This proceedings of the 5th International Conference on Structural Safety and Reliability (ICOSSAR '89) held on August 7-11, 1989 in San Francisco, California contains almost...

Museum Showcases the Future
On May 4 in Philadelphia, the Franklin Institute's new wing, called the Futures Center, will open to the public. When the institute's neoclassic main buiding...

Exploratory Shaft Facility
This paper is an overview of engineering and concept development for the Exploratory Shaft Facility (ESF) of the Yucca Mountain Project. The paper presents a general description of the...

Rock Mechanics Aspects of the ESF Design
Selected aspects of the ESF rock mechanics design are outlined with emphasis placed on specific requirements imposed on the design process conducted within quality assurance-controlled...

Preliminary Methodology for Design of Stable Drifts for the Yucca Mountain Project
The Yucca Mountain Project is investigating the feasibility of locating a high-level radioactive nuclear waste repository at Yucca Mountain, Nevada. The conceptual design of the repository...

Public Involvement: Keystone to Public Confidence in the Civilian Radioactive Waste Management Program
The barriers to public confidence in the safety of high level radioactive waste facilities can only be overcome by encouraging meaningful participation by the public in the decisionmaking...

Public Communication and Participation Activities in Siting Controversial Facilities in the United States and Western Europe: An Examination of Lessons Learned
The authors of this paper conducted a comprehensive review of literature discussing the siting of controversial facilities in the United States and Western Europe in order to identify...

Facility Interface Capability Assessment (FICA) Project
The U.S. Department of Energy-Office of Civilian Radioactive Waste Management (DOE-OCRWM) is sponsoring the Facility Interface Capability Assessment Project to determine current and potential...

Hedonic Price Theory: Concept and Applications
Direct and indirect techniques are being used to estimate economic consequences of proximity to existing or proposed public facilities. The hedonic price theory, an indirect technique,...

Case System and Ancillary Equipment Maintenance
Per-shipment activities, incidental maintenance, repair, and routine maintenance for Federal Waste Management System (FWMS) casks and ancillary equipment and responsibility for those activities...

Automated Manufacturing in Platform-Based Orbital Systems (APROPOS)
As an example of an orbital manufacturing scenario, an automated orbital manufacturing system is designed for the production of turbine blades for high pressure turbines. The target here...

An Introduction to Pressurized Volumes in Space
Space habitation designers come from diverse backgrounds. As it is human nature to emphasize that which is familiar, habitat design is strongly influenced by the designer's...

Commercial Launch Facility Economic factors
Launch facility construction, maintenance and modification costs remain a largely invisible part of the cost of putting mass into orbit. The government can lease launch facilities to commercial...

Artificial Gravity Research Facility Options
On a long duration manned mission to Mars, the physiological changes caused by microgravity may be counteracted by artificial gravity. This paper evaluates several different classes of...

 

 

 

 

Return to search