Professional Training Potomac Electric Power Company (PEPCO)
Training of professionals within the Generating Engineering and Construction Group at the Potomac Electric Power Company is most intensive right after hiring but continues to the executive...
Training Programs for Engineering Consulting Firms
Engineering consulting firms heavily use and support in-house training programs. The objectives of these training programs are to: (1) supplement the graduate engineer's educational...
In-House Training Program at J. A. Jones Construction Services Company
This paper offers an overview of the training provided by a construction company located at Hanford, Washington. It posits that attention to the training development of the individual...
Traffic Barriers: A Second Chance
More motorists are killed each year after striking traffic barriers than any other fixed object except utility poles and trees. These deaths occur primarily because the guardrail or bridge...
Enhancing Highway Safety Through 3R Construction
The safety improvement programs specifically aimed at correcting high accident locations (HALs) are certainly helpful. These programs have resulted in sizeable frequency as well as severity...
Non-Freeway Programwide 3R Accident Analysis: New York
The New York Program for restoration, rehabilitation and resurfacing (3R's) has relied on broad scoped projects and case-by-case consideration of exceptions to design standards...
RRR Design Standards: Cost-Effectiveness Issues
The Transportation Research Board study of geometric design standards for RRR projects is currently trying to match the logic of cost-effectiveness to the mostly judgmental process of...
Sighting Safety
This paper examines the interrelation between drivers' visual needs and the road environment. Specific elements of visual limitation and drivers at greatest risk are identified....
Location and Development of Safety Projects
Projects to be considered for inclusion in the Highway Safety Improvement Program (HSIP) must be part of a prioritized listing in which each project is based on accident experience or...
Evaluation?A Key to Safer Design Standards
Public highways are designed and constructed in accordance with established standards which have been developed over the years as a result of research studies or developed by committees...
Frequency Domain Analysis of a Tank-Soil System
The dynamic response of an elastic cylindrical tank supported on a rigid base under a harmonic vertical excitation is analyzed taking into consideration its interaction with the foundation...
A Salt Solution for Nuclear Wastes
The Department of Energy's Waste Isolation Pilot Plant in Southeastern New Mexico is the nation's first full-scale facility for disposing of radioactive waste...
Fire on the Water
Incineration is a promising hazardous waste disposal technique. However, nobody wants an incinerator constructed near him, so waste handlers are considering burning hazardous wastes at...
Attapulgite: A Clay Liner Solution?
Poor performance of clay liners at waste management facilities has resulted in the EPA mandate of synthetic polymeric liner materials to comply with zero penetration requirements. Laboratory...
Risk Assessment: Engineering Tool
In factoring in human-health impacts when tackling an environmental problem, risk assessment is often the best approach. Its use is growing fast. The technique increasingly is being used...
Use of Vibration Tests to Determine Lateral Load Paths in Medium Rise Buildings
A structural system identification procedure is described in which an initial analytical model of a building is modified until it predicts accurately the mode shapes and natural frequencies...
Strengthening of a Multi-Story Building with Deflection Constraints
Occasionally the existing structural or nonstructural systems of a building being strengthened require the imposition of deflection constraints or limits in order to avoid an undesirable...
Regional Risk Assessment of Existing Buildings
This paper describes current research underway at Stanford University designed to develop a methodology for determining high risk buildings in a region. The work involves developing a...
Building Identification: Needs and Means
The need to conduct 'system identification' of existing buildings by nondestructive testing is discussed. A recommended flow-chart is exemplified. Existing dynamic...
Evaluation of Seismic Strengthening of an Existing Building Using Base Isolation
This paper summarizes a study performed by Englekirk and Hart, Inc. to evaluate the feasibility of using base isolation to seismically upgrade an existing highrise building. To realize...
Return to search