Cold Regions Engineering
The Cold Regions Infrastructure?An International Imperative for the 21st Century
This volume includes papers presented at the Eighth International Conference on Cold Regions Engineering?The Cold Regions Infrastructure: An International Imperative for the 21st Century....
Honolulu's Street Relief
Engineers faced the daunting prospect of burying a new relief sewer under a busy Honolulu highway with trench-cut methods. The contractor suggested microtunneling, but the coral reef formations...
Detecting Leaks Electronically (Available only in Geo/Environmental Engineering Special Issue)
An innovative monitoring system originally developed to detect cyanide leaks at gold mines can now monitor the integrity of geosynthetic liners at municipal- and hazardous-waste landfills...
Lessons From Kobe
On Jan. 17, Kobe, Japan became the first post-World War II, heavily populated, industrialized area to bear the full brunt of a high-magnitude earthquake. Engineers hope the resulting destruction...
Impact-Echo Strikes Home
Diagnosing flaws without destroying the structure is the first step to cost-effective repairs. Impact-echo is one of the more successful nondestructive evaluation (NDE) methods that have...
Piggyback Tunnels
Coincidental alignments of the Central Artery Tunnel and the Transitway subway line under the streets of Dewey Square in Boston presented the sponsoring agencies with a rare opportunity...
Engineering a Landslide
A slope failure in northwest Alabama has been stabilized using a system of grouted INSERT piles to provide load transfer across the failure surface of the slide. This system, referred...
Advances in Underground Pipeline Engineering II
The first international conference on Advances in Underground Pipeline Engineering was held in 1985. Some 50 authors and over 300 delegates from 20 countries took part in the presentations...
Documenting Design-Build
For engineers more familiar with the traditional design�bid�build process, design�build might present some unforeseen risks and responsibilities. To define and allocate these, the Engineers...
Waste Containment Facilities
This book presents a comprehensive description of recommended procedures for construction quality assurance (CQA) and control (CQC) for waste containment facilities. Chapter 1 describes...
Trenchless Relief
During wet weather, stormwater infiltration/inflow into the sewer system increases wastewater flows by 8-12 times the average dry weather flow in several interceptors operated by the Central...
Enabler Chassis Features and Mobiltiy Analysis
The Enabler is a proposed Lunar Base work vehicle. The unique construction of the Enabler's six-wheeled chassis provides unusual articulation for steering, balancing, and overcoming obstacles....
The Optimal Selection of Robot Modules for Space Manipulators
Monolithic robot systems are poorly suited to the broad requirements and uncertainties of space automation applications. Designers have considered building many robots, each of which can...
Effects of Force Reflection on Telerobotic Performance
The University of Kansas Augmented Telerobotics Laboratory conducted a study to examine the effects of force reflection on telerobotic system and operator performance in performing two...
A Conceptual Study of A Solar Power Satellite Using Centrifugal Force
We studied the self deployable Solar Power Satellite (SPS) using centrifugal force in order to explore ways in reducing construction costs. We designed a 340 kW SPS, and studied the unfolding...
A Dome For the 21st Century
Putting a circular dome on a square building--the classical architectural design challenge--takes on new proportions at the Federal Building and Courthouse in Charleston, W. Va. The 170...
Monitoring of Structures During Repair of Underground Utilities
A collapse of underground utilities at a power plant required the constant monitoring of the surrounding structures during excavation and replacement of the damaged pipes. A computer-based...
Validation of the European Yield Model for Nailed Connections
Recent changes in National Design Specification for Wood Construction (NDS) connection design methods make it necessary to validate the European yield model (EYM) for nails. Test values...
Cyclic Behavior of Joints Between Steel Beams and Reinforced Concrete Columns
The design and behavior of composite beam-column joints for seismic design are reviewed based on the results of tests. Issues addressed include the strength, deformation, and toughness...
Recent Studies of the Behaviour of Semi-Rigid Composite Connections
Following renewed interest in the semi-rigid properties of joints in steel frame structures, a more recently identified area of research has been the study of composite connections. The...
Return to search