ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Settlement Analysis for 450 Meter Tall KLCC Towers
The site evaluation and settlement analysis performed for the two tallest buildings in the world currently under construction, are described. The site evaluation resulted in shifting building...

Effect of Roughness and Thickness of Biofilms on External Mass Transfer Resistance
The effect of roughness and thickness of biofilms on the dissolved oxygen (DO) concentration boundary layer thickness (DO CBLT) and the external mass transfer process in a biofilm system...

Hydrodynamic Forces in Hydraulic Jump Stilling Basins
The knowledge of hydrodynamic forces acting on hydraulic jump stilling basin slabs has been a research topic for the past four decades. Published methodologies for computing the hydrodynamic...

Ultimate Depth of Scour Around Bridge Piers
A design equation for estimating ultimate depth of local scour at bridge piers has been proposed which is based upon the envelope curves drawn to published field data covering a wide range...

Bridge Pier Scour Equations - An Assessment
A comparative assessment of various bridge pier scour equations has been reported on the basis of analyzing a set of published prototype data from Indian rivers and other countries covering...

Probable Maximum Flood Estimation for New and Existing Dams
Although various attempts have been made to streamline the procedures to determine PMF hydrographs for the design of new and rehabilitation of existing dams, there still remains a great...

HEC River Analysis System (HEC-RAS)
The Hydrologic Engineering Center (HEC) is developing next generation software for one-dimensional river hydraulics. The HEC-RAS River Analysis System (HEC, 1994) is intended to be the...

Hydraulic Design of Spillway Plunge Pool Linings
The design of plunge pools for high head spillways with flip bucket terminal structures often requires a detailed examination of the stability of the resulting scour hole in the river...

Revised Hydraulic Design of the Rio Hondo Flood Control Channel
The US Army Engineer District, Los Angeles has completed a major review study of the Los Angeles County Drainage Area (US Army, 1992) and has determined that the existing flood control...

Design Considerations for Use of Wedge Wire Screens at Surface Water Intake Structures
This paper provides the suggested guidelines for design, construction, operation and maintenance of wedge-shaped wire cylindrical screens used for aquatic biota and trash and debris screening...

An Improved Design of Fishways Under High Variation of Headwater
For the purpose of mitigating environmental impact, it is necessary to build fish passing facilities for fish migration when a dam is constructed on a river. But when the headwater variation...

Hydraulic Model Studies of Recessed Curb Inlets and Bridge Drains
A large hydraulic model (64 ft long by 10.5 ft wide) was used to test several geometries of recessed curb inlets and three types of bridge drains. Testing was at 3/4 scale for the recessed...

Design of Manning's-Rougness-Coefficient Study in New York State
Field-collected hydraulic data can be used to compute roughness coefficients for channels with different hydraulic characteristics. Suggested criteria for the design of a roughness-coefficient...

At-A-Site Mountain River Flow Resistance Variation
At-a-site variation in flow resistance is examined in the light of observations of an S-shaped velocity profile at relative submergences (d/D₈₄)...

Evaluating Flow Resistance Using Height of Roughness Protrusions
On the basis of field measurements on the Sumava mountain rivers heights of roughness protrusions have been used for calculation of flow resistance. The result resistance equations, compared...

Flow Resistance of High-Gradient Gravel Channels
The flow resistance in terms of the friction factor for bank-full or high in-bank flows for 120 high-gradient gravel-bed rivers are examined. The friction factor f was divided into grain...

Step-Pool Streams: An Adjustment to Maximum Flow Resistance
An experiment was conducted to study the maximum flow resistance of step pool streams and the morphology of the steps formed from clastic materials. The step pool formation was qualitatively...

Historic-Flood Evaluation and Research Needs in Mountainous Areas
An evaluation of historic flood estimates in mountainous areas in Colorado was made to assess their accuracy. The purpose of this evaluation is to enhance awareness of the need to assess...

Sediment Transport in Sewers and Design Implications
Extended studies on sediment transport in sewers were conducted at the University of Newcastle upon Tyne and using this new as well as previously available data an attempt has been made...

An Improved Design of Excluding Sediment into River Intake Structures
The function of excluding sediment into river intake structures is usually achieved by the device of sluice ways. Although many sluice ways have been constructed and many formulas are...

 

 

 

 

Return to search