Chemical Resistance of Thermosetting Resins Used for Cured-in-Place Pipe
This paper summarizes the chemistry, short term physical properties, and long term chemical resistance for representative epoxy vinyl ester, epoxy, and polyester resins that are currently...
The Design and Development of A Road/Rail Power Unit
The road/rail power unit was designed and developed by Saskatchewan Highways and Transportation to provide low cost motive power on low-density disconnected rail lines. The power unit...
The Transrapid EMS Maglev System
The Transrapid 300 mph (500 km/hr) magnetically levitated transportation system is ready for revenue application. The maglev system uses contactless electromagnetic suspension and three...
Development of a Superconducting Maglev System
The superconducting maglev system features an electrodynamic levitation system (EDS) which enables a super high speed running without any special control device for levitating a coach...
SHRP Deformation Test?Asphalt Mix Tests and Analysis Systems
From analyses of existing information on the permanent-deformation characteristics of asphalt/binder-aggregate mixes, as well as the development of permanent deformation in pavement structures,...
Accessibility of Geotechnical Earthquake Engineering Data and the Need for Data Storage and Dissemination Standards
Ease of data access and data standards are two issues critical to the success of GIS technology when applied to earthquake hazards research problems that require geotechnical engineering...
Steel Exoskeleton Defines Architecture
The Hotel de las Artes multi-use complex in Barcelona, Spain consists of a luxury hotel/apartment tower, a commercial office building, retail, parking and other amenities. The most prominent...
Mechanistic Design Models of Loading and Curling in Concrete Pavements
Determination of the critical bending stress at the edge of a concrete pavement due to individual and combination effects of wheel loading and thermal curling is very crucial to any mechanistic...
ICAO's ACN-PCN Method and Aircraft-Pavement Interaction
Multi-wheel gear assemblies of future aircraft are not compatible with pavements rated in the ACN-PCN system given by the International Civil Aviation Organization (ICAO). The Aircraft...
Airfield Pavement Structural Evaluations, Current Practice and Future Needs
The United States Air Force's pavement evaluation teams have to be able to go quickly anywhere in the world to evaluate an airfield pavement's structural capability. A combination of non-destructive...
A Novel Approach to Develop a Performance Based Test for Rutting of Asphalt Concrete
Asphalt concrete consists of compacted granular aggregates mixed with viscoelastic asphalt cement. The predictive phenomenological models had limited success in explaining the origin and...
Resin Modified Pavement in Airfield Applications
The resin modified pavement (RMP) is a composite paving material that combines the flexible characteristics of an asphalt concrete (AC) material with the durability of a portland cement...
Evaluation of a Large Aggregate Asphaltic Layer in an Airside Pavement
A new analytical method of designing large aggregate asphalt mixes (LAM) was used to design a thick asphalt base layer for an aircraft taxiway. The results of an analysis on the material...
Evaluation of Elastic Layered Theory for Airfield Pavements, Using Nondestructive Testing and In-Place Response Measurements
Airfield pavement deflections measured under actual aircraft loads were compared to predictions based upon elastic layer theory and moduli backcalculated from failing weight deflectometer...
Measurement and Analysis of Airside Pavement Roughness at the Dallas/Fort Worth International Airport
In May 1990, Dallas/Fort Worth International Airport management contracted with Harding Lawson Associates to implement a pavement management system for that airport. In this implementation,...
An Introduction to APM Systems and Applications
An Automated People Mover (APM) is an advanced transportation system in which automated driveless vehicles operate on fixed guideways in exclusive rights-of-way. These differ from other...
Integrating Waiting Time in the Design of a Transportation System for Short to Intermediate Distances
This paper addresses passenger perceptions of short to medium distance public transportation systems. The concept of the weighted total transportation time (WTTT) is introduced, integrating...
Jacksonville's ASE Crosses the River
After over three years of operation, the Jacksonville (Florida) Automated Skyway Express (Skyway) downtown people mover system is expanding. The Jacksonville Transportation Authority (JTA),...
Las Vegas?A Significant APM Market
Las Vegas, the gambling and entertainment center of the nation, contains the world's largest concentration of hotels and casinos, and attracts over 18 million visitors a year. APMs have...
Expansion of the Newark International Airport Monorail
The Port Authority of New York and New Jersey (PA) has planned, designed, and begun constructing an APM system at the Newark International Airport (EWR). This system, called the Monorail,...
Return to search