Design of Thin Wall Reinforced Concrete Pipe Using Dimension Ratio (DR)
Dimension Ratio is defined as the ratio of the internal pipe diameter to the pipe wall thickness. The Caltrans culvert research leading to the development and use of the Dimension Ratio...

Role of a Standard in the Production of Drilled Shafts
The preparation of drawings and documents that describe the details of the installation of drilled shafts for a project requires an up-to-date standard. The role of the standard in the...

Geotechnical Perspective?Proposed Drilled Shaft Standard
In the writer's understanding, a standard is an agreed upon manual of practice and as such, sets the level of performance and attainment considered adequate. A standard is...

A Structural Engineering Perspective for Drilled Shafts
This commentary is an attempt to close the gap between the Building Code Requirements for Reinforced Concrete (ACE 318-83) and the design of drilled shafts. The context of design includes...

Computer Aided Design of Reinforced Concrete
An interactive computer-aided design (CAD) program for the design of reinforced concrete members is herein described. The program, called ECPRS, designs reinforcement and performs all...

Fabric-Reinforced Dikes, Craney Island
Three fabric-reinforced test sections 300-, 400-, and 750-ft long were successfully constructed on very soft dredged material deposits within the Craney Island dredged material disposal...

Electronic Computation
Dramatic changes have occurred in computer-aided structural engineering during the past 25 years. Computers have evolved from large, slow processors with little available storage to fast...

Restoration
After the San Fernando earthquake of 1971, California's State Capitol Building was declared an earthquake hazard and vacated. It took the most extensive structural and architectural...

Flanged Reinforced Concrete Flexural Members
Design aids in the forms of charts and tables are available for design of reinforced concrete flexural members. Many of these design aids were developed for design of rectangular cross...

Engineer's Notebook: One-step Formula for R/C Tension Steel
In the design of reinforced concrete beams, after loadings and materials are defined, the first step is to assume a beam depth. Then the required steel area and beam width are determined....

Fiber-Reinforced Concrete Proves Worth for Airport Pavements
Laboratory and field tests indicate that fiber-reinforced concrete has higher flexural and tensile strength, higher impact resistance, and improved resistance to spalling and joint deterioration...

State-of-the-Art Report on Finite Element Analysis of Reinforced Concrete
This comprehensive state-of-the-art report contains a summary of the special features of finite element analysis applied to reinforced concrete, including: constitutive relationships,...

Fiber Reinforced Concrete
In the past 10 years or so, concrete reinforced with fibers one or two inches long has begun to be used, first on a demonstration and experimental basis, then in major everyday applications....

Compression Rings Support Deep Cut
The plans for building the Cuyahoga Valley Interceptor Lift Station in Cleveland, Ohio, called for 126 ft. (38.4 m) by 105 ft. (32 m) construction, some 80 ft. (24.4 m) below grade. Bracing...

Design and Construction of World's Tallest Free-standing Fiberglass Stack
The design, fabrication and erection procedures are discussed for a 170-ft free-standing fiberglass reinforced plastic exhaust stack-scrubber system. Advantages and disadvantages in the...

Structural Plastics for the 80s
Engineers in non-civil fields have been using more and more light-weight, high-strength structural plastics and plastic composites every year, but civil engineers have barely begun to...

Synthetic Fabrics for Reinforced Embankments
Non-woven permeable synthetic fabrics have been used in engineering applications for the last ten years. Considerable research has been conducted throughout the world since the first geotechnical...

Dallas College Features Load-Bearing Brick Cavity Walls
A unique concept in masonry design and construction was developed for the Brookhaven College campus in Dallas, Texas. Centering on the use of prefabricated reinforced brick panels and...

Construction of Power Generation Facilities
The impact of the present construction practice, codes, standards and regulations on the construction of power generation facilities is reviewed and examined in papers presented at the...

Carbon Treatment of Drinking Water: N.J. Plant Trying to Get Out Bugs
The federal Environmental Protection Agency wants drinking-water plants in the U.S. to install granular activated carbon treatment. Such would remove synthetic organics in the water. There's...

 

 

 

 

Return to search