A Value Engineering/Risk Analysis Approach to Operation and Maintenance of Hydraulic Structures
Value engineering is an objective, systematic method for minimizing cost of a system. Risk analysis is a method of quantifying uncertainties or probabilities of possible economic loss,...
Risk Analysis as a Tool to Determine Spillway Design Capacities
Lyman Dam is an earth and rockfill structure located on the Little Colorado River approximately 11 miles south and upstream of St. Johns, Arizona. Several studies examining the safety...
Estimation of Expected Damages, Indemnification Costs and Joint Probabilities of Dam Failures
This paper describes three methods to evaluate structural options for the rehabilitation of an existing dam using the dollar-denominated risk and capital cost associated with each option...
GIS: Easing Infrastructure Management
GIS provides an ideal means for city planners and engineers to plan construction and maintenance of water-distribution networks, wastewater-collection systems and treatment plants, highways,...
Field and Model Studies of Ocean Outfalls
Field and laboratory studies of the behavior of wastewater discharged from the San Francisco ocean outfall are reported. Wastefield behavior was predicted by the mathematical models RSB...
Chemically-Enhanced Treatment: An Alternative to Biological Secondary Treatment for Ocean Outfalls
Chemically-enhanced treatment is a process whereby chemicals are added to wastewater in order to enhance solids removals through coagulation. This treatment process can obtain removal...
Task Committee on Transport Processes at the Interface of Water Column and Bottom Sediment
The Task Committee on Transport Processes at the Interface of Water Column and Bottom Sediment was formed on October 1, 1989 under the Technical Committee on Hydrologic Transport and Dispersion...
Soluble Pollutant Enrichment in Snow Covers
A mathematical model is presented to simulate enrichment of soluble pollutants in snow covers. The model is based on the liquid water flow, heat transport, and pollutant transport equations....
Shop Creek Stormwater Quality Enhancement Project
The advent of NPDES regulations for stormwater discharges creates a need to verify, on a regional basis, the effectiveness of emerging water-quality control technologies such as extended...
CORMIX2: Expert System for Multiport Diffuser Discharges
The Cornell Mixing Zone Expert System (CORMIX) is a series of software systems for the analysis, prediction, and design of aqueous toxic or conventional pollutant discharges into watercourses,...
Failure Modeling of Hydraulic Systems
Techniques of survival analysis are investigated for modeling the failure of hydraulic systems. The Proportional Hazards Model has the advantage of being able to separate the effects on...
Stability Criteria for Revetments
A simplified 'black box' approach is presented for a number of revetment systems for banks and shore protection. The design criteria, based on the physical similarity...
Modification to John H. Overton Lock and Dam
The Red River Waterway Project, Mississippi River to Shreveport, Louisiana, will consist of a navigation channel 9 feet (2.7m) deep by 200 feet (61.0m) wide, 5 locks and dams providing...
Guard Gate Tests at Tieton Dam
The emergency gate hoist system on the guard gates at Tieton Dam, near Yakima, Washington, was tested as part of the United States Bureau of Reclamation Safety Evaluation of Existing Dams...
The Sediment Weighted Histogram Generator and Estimation of Sediment Transport Trends
Long term sediment transport trends may be evaluated using a sediment histogram generator program that was written for microcomputers. Flows can be extracted directly from a compact disc...
Kinematic Wave Based Hydrologic Models with Different Solution Methods
The hydrologic simulation models RUNOFF and HEC-1 are applied to a 3212-ha watershed in New Jersey, and performances of the two models in predicting historical stromwater hydrographs from...
Integration of GIS, Remote Sensing, and Digital Elevation Data for a Hydrologic Model
The Agricultural Nonpoint Source Pollution Model (AGNPS), which was developed by Agricultural Research Service, was used as a test model for assessing nonpoint source pollution. The model...
Paleoflood Hydrology and Design Decision for High-Risk Projects
Paleoflood hydrology is not merely one of several alternative methods for risk-based design. Rather, certain kinds of accurate data on the largest paleofloods of recent millennia provide...
Application of the Ackers-White Procedure for Transport by Size Fractions and Testing in HEC-6
Modification of the Ackers-White method for the calculation of sediment transport by size fractions has led to a procedure which not only permits such calculations, but also increases...
Municipal Stormwater Management Ordinance Development and Implementation in Pennsylvania
This paper discusses the critical planning and engineering components of a sound stormwater management ordinance and how they can be shaped to avoid commonly encountered basin-wide implementation...
Return to search