Spacecraft Wall Design for Orbital Debris Impact
This paper describes a method for obtaining the optimal rise angle of corrugated bumpers for the design of space structures in the event of an on-orbit impact. The procedure determines...
Distributional Information for Ejection Fragments
Due to lack of experience of building structures on the lunar surface and the variability that will exist in the loading as well as the structural resistance, it is suggested that initial...
Roles of the Lunar-Solar Power System In Development of the Resources of Greater Earth for Mankind
The proposed Lunar-Solar Power (LSP) System collects solar power on the moon. The power is converted to beams of microwaves and transmitted to fields of microwave receivers on Earth that...
A Summary of the NEPSTP Nuclear Safety Program
The Nuclear Electric Propulsion Space Test Program (NEPSTP) is sponsored by the Ballistic Missile Defense Organization (BMDO) to demonstrate and evaluate the Russian-built TOPAZ II nuclear...
TOPAZ II System Description
The TOPAZ II single-cell thermionic space reactor power system was designed, built and tested by the former Soviet Union (Russia). It has been purchased by the United States (U.S.) for...
TOPAZ II Qualification and Nuclear Testing Program
This paper presents an overview of the Topaz II qualification and nuclear test program. The program combines the joint efforts and resources of Russian and American specialists and organizations...
A Comparison of Propulsion Systems for Space Exploration
There are three promising propulsion systems that might be used for space missions: chemical, direct nuclear, and nuclear electric. Selecting the best system for a mission involves comparing...
A Discussion of Nuclear Propulsion in Space Travel
Nuclear thermal propulsion (NTP) is gaining popularity as a safe alternative to conventional propulsion. Such alternatives are desirable to meet the goals of lunar colonization and manned...
Propulsion Systems for Future Space Exploration
There are many types of propulsion that are being considered for future space travel needs. These include nuclear, solar sail, magnetoplasmadynamic (MPD) thrusters, and laser propulsion...
Propulsion Systems: Present and Future
Propulsion is the very essence of space travel. There are many types of propulsion. Each type has its advantages and disadvantages. Propulsion systems are constantly being improved just...
Solar Power Satellites
Earth's fossil fuel supply is dropping quickly. A new power source must be developed to save the remaining fuel and control pollution output. Solar power satellites are large satellites...
Preserve and Protect
Historic and landmark structures constructed of unreinforced masonry and stone are among the most vulnerable to strong ground shaking and are often subject to possible collapse. For the...
Concrete Buildings in Regions of High Seismicity
Structural systems for multistory concrete buildings in regions of high seismicity are reviewed. The suitability and certain practical aspects of the systems are discussed. A Uniform Building...
Seismic Design of RC Structural Walls with Unsymmetrical Cross-Sections
An overview of seismic design issues and current experimental research for walls with unsymmetrical cross-sections is presented. The experimental studies include approximately 1/4 and...
U.S. / Japan Large Scale Cooperative Research Program for Steel Structures
The US/Japan Cooperative Research Program Utilizing Large Scale Test Facilities for Earthquake Resistant Design was initiated in 1980 using a combination of full-scale, small-scale, subassemblage...
Impediments to the Implementation of Seismic Isolation
There are over 400 civil engineering structures, worldwide, that have been constructed using the principles of seismic isolation, and 70 of these are in the United States. Although use...
First Bank Place: A Composite Cruciform Spine
The First Bank Place, designed by the internationally known architectural firm of Pei Cobb Freed and Partners, is a granite-clad, 56 stories tall building in downtown Minneapolis. Presented...
Application of Concrete-Filled Steel Tubular Columns in Tall Buildings in Earthquake Area
In this paper an outline is given of the background, the design concept, structural features, construction and economy of the concrete-filled steel tubular coumns of tall buildings in...
Talmadge Bridge Replacement
This paper discusses the design of the main spans and approach spans for the replacement of the Talmadge Bridge for the Georgia Department of Transportation. The design of the concrete...
Overweight Trucks and Safety of Bridges
Most states face increasing pressure to issue more and heavier overweight truck permits. Current permit checking methods of many states adopt the AASHTO rating concept with or without...
Return to search