High-Performance Powder
The application of fundamental principles related to the composition, the making, and the thermal treatment of concrete resulted in the development of a new type of concrete with outstanding...
Concrete Change
The concrete industry has an array of options when it comes to recycling. Incorporating glass, chicken feathers, palm fronds, sludge, crushed computer casings or other recycled materials...
Tough Conditions, Innovative Solutions
Two major innovations in U.S. construction practice are part of the solution to a complex and difficult portion of the Massachusetts Highway Department's Central Artery/Tunnel...
Geotechnical Performance of a Highway Embankment Constructed Using Waste Foundry Sand
A highway embankment was constructed near Auburn, Indiana, using waste foundry sand (WFS) as a demonstration project for the Indiana Department of Transportation (INDOT). Laboratory testing...
Recycled Materials for Embankment Construction
Obtaining good quality soils at reasonable costs for use in embankment construction is becoming difficult and hence, attention is directed towards finding alternative materials. On the...
Utilization of Lagoon-Stored Lime in Embankment Construction
The maximum percentage of lime that can be mixed with a predetermined borrow material to build the proposed road embankment without adversely affecting the physical and mechanical properties...
Compaction Characteristics of Contaminated Soils-Reuse as a Road Base Material
Contaminated soils generated from leaking underground storage tanks (USTs) sites are classified as solid waste or non-hazardous waste. Since petroleum contaminated soils are solid waste...
Geotechnical Earthquake Engineering and Soil Dynamics III
This proceedings,
Cold Regions Impact on Civil Works
This proceedings ,
Grouts and Grouting
A Potpourri of Projects
This proceedings,
Brownfields by the Book
To spur the redevelopment of brownfield properties, many state legislatures have passed laws that allow developers to revitalize contaminated industrial sites without the high risks or...
Building to Last
This proceedings,
Design of Blast Resistant Buildings in Petrochemical Facilities
This report provides general guidelines in the structural design of blast resistant petrochemical facilities. Informational coverage is provided for OSHA requirements, design objectives,...
Guidelines for Seismic Evaluation and Design of Petrochemical Facilities
These guidelines are intended to provide practical recommendations on several areas which affect the safety of a petrochemical facility during and following an earthquake. In the area...
Mechanics of Deformation and Flow of Particulate Materials
This proceedings is composed of written contributions to the nine-session symposium on the Mechanics of Particulate Materials at the McNU Conference held at Evanston, Illinois, June 29-July...
Wind Loads and Anchor Bolt Design for Petrochemical Facilities
Current codes and standards do not address many of the structures found in the petrochemical industry. Therefore, many engineers and companies involved in the industry have independently...
Los Angeles Metro-TBM Starter Tunnels-Mixed Face Conditions
Twin TBM starter tunnerls with mixed face conditions were successfully mined by roadheader with steel rib and shotcrete initial support beneath the Hollywood Freeway. Tunneling and total...
Old Aswan Dam
Egypt's Aswan Dam is almost 100 years old, and engineers performed tests of the masonry, conducting petrographic and chemical analyses. The High and Aswan Dam Authority of...
Grouting Pains (Available in Geoenvironmental Engineering Special Issue)
The article focuses on a new grouting technique for filling holes drilled during site investigation. The holes are grouted as the drill is withdrawn from the hole, instead of filled later....
Degradation of Natural Building Stone
This proceedings,
Return to search