Cost-Effective Arctic Concrete Structures
The economic development of offshore Arctic petroleum fields dictates that Arctic structures be both cost-effective and deliverable with minimum lead time. Concrete structures are typically...
Coastal Erosion's Impact on California Offshore Oil Development
Recent oil discoveries in the offshore Santa Maria Basin and the Santa Barbara Channel will require the construction of new oil facilities located along 90 miles of Santa Barbara County...
The Impact of Selected Sea Level Rise Scenarios on the Beach and Coastal Structures at Sea Bright, N.J.
The physical impacts of selected sea level rise scenarios on the shoreline of Sea Bright, New Jersey, are investigated. The sea level rise scenarios chosen for investigation were developed...
Earth Pressure on Underground Rigid Pipe in a Centrifuge
A series of centrifugal model tests on underground pipes that simulate the actual construction process were carried out to investigate the earth pressure concentration onto the pipe (particularly...
Biggest Highway Rebuild
The reconstruction of the Wisconsin Interstate 90 and 94 involved 32 miles of 6-lane pavement. Most of the concrete aggregate for the job was recycled concrete pavement and all pavement...
Multi-Truss Design for Tower
A modified structural steel system of outrigger trusses and belt trusses bolster the 54-story Equitable Tower West. Located in New York City, the building's structural system...
Structural Considerations for a Radwaste Facility
The structural engineer needs to consider several criteria when designing a radioactive-waste processing facility in order to properly balance the requirements of safety and economy. This...
Structural Retrofit for Nuclear Power Plants
Retrofitting of nuclear power plants is a major concern these days. Recent rulings of regulatory agencies have affected most of the generating plants in some way. The lessons learned from...
Modifications At Operating Nuclear Power Plants
In these days of continuing regulatory requirement changes and high interest rates, the engineering of structural modifications for operating nuclear power plants has taken on greater...
Intact Decommissioning Alternative for Nuclear Power Plants
Previous studies of decommissioning options for nuclear power plants have examined potential alternatives such as immediate dismantlement, entombment, and moth-balling. This paper describes...
Civil Engineering Challenge with Nuclear Waste
The planning, design and construction of the ground surface facilities for a nuclear waste repository involves civil engineering in many ways. The transportation of heavy, metal shielded...
Innovtive Designs for Low-Level Nuclear Waste Disposal Trenches
Shallow land burial of low-level nuclear wastes presents many problems that are within the scope of civil engineering analysis and design. This paper presents the results of a U. S. Nuclear...
Local Pressure in Ice-Structure Interactions
Two models for the determination of local pressures during marine ice or iceberg collisions with bottom-founded structures are presented. The first model is a two-dimensional analytical...
Mixing Steel and Concrete
For highrise structures, mixed steel-concrete systems are more efficient and cost less than either material alone. The two design approaches are exterior tube structures and core braced...
The 1984 novel
Classification of Human Errors
Error control should be a primary part of any risk control strategy. Classification of errors may serve as a basis for the systematic analysis to eliminate the causes and to reduce the...
Random Vibration Techniques
The paper presents a review of random vibration techniques for analyzing dynamic systems from the perspective of applicability to structural engineering. Problems involving linear or nonlinear,...
A Damage Function Using Structural Response Measurements
A new damage function is proposed that expresses seismic damage in terms of the range and number of cycles of plastic deflection experienced by a structure. This and other damage functions...
Finite Element Methods in Structural Safety Studies
The use of finite element methods in structural safety studies is discussed and recent work in the area is briefly reviewed. Formulation for a first-order stochastic finite element method...
Concepts and Methods in Reliability-Based Structural Optimization
This paper presents an overview of the major concepts and methods used in reliability-based structural optimization. New formulations related to multicriteria optimization are developed....
Return to search