Three Automatically Erected Folding Spans
The U. S. Navy has identified three rapidly erected bridges. Each is capable of spanning 400 feet (120 m) with a 70 ton (63 tonne) live load at mid-span. Each will also fold into a 15...
Design of Steel Transmission Pole Structures
This document has been carefully prepared in an effort to provide an authoritative source of information about effective design and fabrication of steel transmission pole structures. The...
Measures Against Wind-Induced Vibrations of Bridges
The design of very flexible structures, such as long-span steel bridges, are frequently governed by wind-induced vibrations. This paper introduces the present situation of the cable-supported...
Structural Systems for Multispan Cable Suspended Bridges
Multispan cable suspended bridges, i. e. , cable-stayed or suspension bridges with a large number of consecutive main spans of equal size, must be carefully designed to become economical...
Development of a Double Tee Structural System for Highway Bridges
The fully precast, prestressed double tee beams are tied together by transverse post-tensioning through simple grout filled V-joints. The system provides for complete transversal continuity...
Micro=Lam? LVL: A New Alternative for Timber Bridges
Laminated veneer lumber (LVL) provides a unique opportunity to obtain large structural members from ever-smaller trees. It provides the added benefit of high treatability. This paper explains...
Wind Tunnel Aeroelastic Model Study of the Baytown Bridge (Steel Alternative)
Analytical and full bridge aeroelastic model studies performed to assess the aerodynamic stability of the steel alternative Baytown Bridge over the Houston Ship Channel are described....
Aspects of Wind and Earthquake Dynamics of Cable-Stayed Bridges
In the course of dynamic analysis of long-span cable-stayed bridges for the effects of earthquake and wind, a number of observations have been made that may be of interest to designers....
Analysis and Design of Wind- and Earthquake-Resistance of an S-Curved Cable-Stayed Bridge
Just recently, in January of 1987, the first S-curved cable-stayed bridge in the world has been completed as a part of Metropolitan Expressway's Katsushika-Edogawa Route in...
Dynamic Behavior of Three J.S. Cable Stayed Bridges
Dynamic considerations in the design of three recently designed cable stayed bridges are discussed. The presentation includes analysis for eigenfrequencies and eigenmodes, assessment of...
The Far? Bridge?Long Life at Low Costs
The superstructure of the bridge is a steel structure which proved to be competitive compared to the tendered concrete solution, due to simple and rational design both structurally and...
General Considerations for Managing Floods and Droughts
Work described at this conference and future developmental work of water resource engineers will best contribute to professional improvement if such work is guided by appropriate objectives....
ENDOW, An Expert System for Screening Environmental Features for Stream Alternations
This paper discusses development of an expert system for Environmental Design of Waterways Projects (ENDOW) by stream alteration specialists who were novices in artificial intelligence....
Maximizing Utility of Interfaces for Hydrologic Models
From the time a watershed layout has been determined, there is sufficient information for a computer to generate a command sequence for hydrologic simulation. Recognizing this fact, an...
HEC-1 and HEC-2 Applications on the Microcomputer
The Hydrologic Engineering Center (HEC) has developed versions of the HEC-1 Flood Hydrograph Package and the HEC-2 Water Surface Profiles programs for MS/PC-DOS compatible microcomputers...
On the Choice Between Annual Flood Series and Peaks Over Threshold Series in Flood Frequency Analysis
Statistical techniques are often used to estimate extreme flood events for the design of a flood-control structure or for any other flood-related purpose. Two kinds of models are commonly...
Comparison of Hydrograph Simulation Techniques Used in Structural Design and Watershed Systems Modeling
This paper describes a basin study in which traditional unit hydrograph analysis methods were compared to the E. J. Inman hydrograph technique. Study results indicate that, where suitable...
Hydraulics of Enlarging Cannonsville Reservoir
This paper describes the hydraulic studies performed for enlarging the Cannonsville Reservoir with a gate system which could raise the normal storage level without having an adverse effect...
Flood Forecasting with Minimal Data
The Corps of Engineers' HEC-1 program has been used with a specialized pre-processor program to provide interim emergency flood forecasting for a 4000 sq mi (10,360 sq km) watershed in...
Hydrologic Runoff Modeling of Small Watersheds: The Tinflow Model
TINFLOW is a PC-based Geographic Information System (GIS) that utilizes the Triangulated Irregular Network (TIN) and associated data structures, together with a deterministic, finite difference...
Return to search