Steady Turbulent Gas Desorption in Surface Condenser Tubes
A one-dimensional steady two-phase separated flow model in conjunction with the energy and mass transfer equations and an associated turbulent mass transfer coefficient model are utilized...
Lysimeters for Evapotranspiration and Environmental Measurements
Lysimeters have been used extensively in the past to provide baseline information for development, calibration, and validation of evapotranspiration methods. This proceedings,
Instrumentation for SASW Testing
The Spectral-Analysis-of-Surface-Waves (SASW) method is presented. Various test setups and corresponding data reduction procedures are discussed. Several instrumentation systems have been...
In-Situ Calibration of USGS Piezometer Installations
Among the few potentially liquefiable sites around the world that have been permanently instrumented with pore-pressure transducers and accelerometers, only the Wildlife Site in the Imperial...
Use of Bender Elements in Soil Dynamics Experiments
Transducers employing piezoelectric bender elements have been found to be versatile sources and receivers of small-amplitude shear waves, with multiple potential applications. The constitutive...
Multi-Directional Wave Velocity by Piezoelectric Crystals
Piezoelectric ceramics are successfully used to measure velocities of waves propagating through a dry granular material assembly. Several directional shear and compression waves are measured...
Use of Piezoceramic Bender Elements in Soil Dynamics Testing
The use of piezoceramic bender elements is described to measure small strain, shear wave velocity distributions in soil models used in centrifuge and shake table testing. Experimental...
Statistical Fatigue Crack Propagation of a Superalloy Under a Block Type Spectrum Loading at Elevated Temperature
A lognormal statistical model was developed for the prediction of crack growth damage accumulations of superalloys under a block type spectrum loading at elevated temperature. Both the...
Earth Pressure Acting on Buried Flexible Pipes in Centrifuged Models
Distributions of both normal and tangential earth pressures acting on three flexible model pipes having different wall thicknesses were successfully measured in centrifuge model tests....
Study of Fractal Aperture Distribution and Flow in Fractures
This study examines the roughness profiles and aperture distributions of fractures and faults by using concepts from fractal geometry. Simple models of flow of fluid in rough fractures...
Thermal Stability of Zeolitic Tuff from Yucca Mountain, Nevada
Thermal models of the potential repository at Yucca Mountain, Nevada, suggest that rocks near the potential host rock will experience elevated temperatures for at least 1000 yr. In order...
Drill-Back Studies Examine Fractured, Heated Rock
To investigate the effects of heating on the mineralogical, geochemical, and mechanical properties of rock by high-level radioactive waste, cores are being examined from holes penetrating...
Prototype Heater Test of the Environment Around a Simulated Waste Package
This paper presents selected results obtained during the 301 day duration of the Prototype Engineered Barrier System Field Test (PEBSFT) performed in G-Tunnel within the Nevada Test Site....
Volatilization of Cesium and Ruthenium From High-Level Waste Glass
The contamination of the air above high-level waste glass by 134Cs, 137Cs and 106Ru...
Calibration of High Frequency Pollen Sequences and Tree-Ring Records
Two radiocarbon dated paleoenvironmental records from southern Nevada are being examined with the possibility of correlating high-frequency pollen samples with nearby long-term tree-ring...
Ventilation and Construction Considerations for a High Level Nuclear Waste Repository
The storage of high level nuclear waste in an underground repository presents engineering problems in ventilation, construction methods and plan, and in proposed retrievability. Temperatures...
Prefabrication of Ceramic Segments by Compaction and Microwave Fusion Technology
Material source and environmental impacts are two major concerns in the application of conventional concrete technology in lunar base construction. In this study, the simulated lunar soil...
The Optimum Dimensions of Radiative Spines
Radiative pin fins (spines) are important in conjunction with heat rejection systems for space applications. In the design of radiators for space applications, spines possessing minimum...
Utilization of Stormwater Runoff to Recharge Underlying Aquifer
Based on the available data and its proximity to the Capital area, Wadi Al Khawd was selected as the site of the first aquifer recharge project in Oman. The project was designed by Stanley...
Morris Sheppard Dam: A Rational Approach to Stability Analysis
This paper details the excessive foundation piezometric conditions found during a routine five-year inspection, and presents the results of backfigured stability analysis of a critical...
Return to search