Seismic Behavior of Non-Ductile Concrete Frame Structures
Non-ductile reinforced concrete (RC) frame structures designed and constructed during the 1950's through 1970's exist in many regions of the United States. The frames of these structures...
Seismic Retrofit of R/C Columns with Inadequate Lap Splices
This paper presents experimental results on the use of rectangular steel jackets to improve the seismic performance of rectangular steel jackets to improve the seismic performance of rectangular...
Seismic Renewal of Civil Infrastructure Systems
Almost all civil infrastructure systems are vulnerable to natural hazards such as earthquakes. The paper presents a broad perspective of the research needs for seismic renewal of the infrastructure...
Analysis of Unstiffened and Stiffened Tubular Members Under External Pressure and Structural Loads
This paper summarizes some important results concerning the ultimate capacity of stiffened and unstiffened tubes under combined loading. Such tubes are candidates for use in offshore structures...
A Generalized Approach to the Local Stability of Stiffened Plates: Part II?Approximate Solution
The paper presents an approximate solution for the prediction of the buckling stress of stiffened plates under combined loadings. A closed form expression is presented for the buckling...
Review of Cold-Formed Steel Purlin Design
The use of cold-formed steel members as roof purlins for single story industrial and commercial buildings is commonly recognized. These members typically have either a C- or Z-shaped cross...
Some Aspects of Compression Member Design in Australia
The paper summarizes and elucidates the provisions of the Australian Standard AS4100-1990, Steel Structures, for the design of compression members. Emphasis is placed on those aspects...
LRFD vs. ASD for Wood Structures
There is a growing preference within the structural engineering community for the adoption of reliability-based load and resistance factor design (LRFD) procedures in lieu of traditional...
What Controls the Ultimate Load of a Glulam Dome?
A glulam dome is analyzed with the finite element method to determine the governing failure mode and ultimate snow loads. The dome consists of a triangulated network of curved glulam beams,...
An Application of Inverse Problem Techniques to Spatial Structures
The present paper attempts to give a definition of inverse problems for spatial structures, and to develop a design method to find the optimum configurations and shapes for such structures...
Field Measurements of Tensile Forces on a Spherical Dome Sector Caused by Internal Load of a Granular Product in Storage
Using a number of existing equations developed application to silos, bins, and hoppers, the horizontal load resulting from the stored product can be calculated. In this paper, the physical...
Design of Half-Through or Pony Truss Bridges Using Square or Rectangular Hollow Structural Sections
The initial part of this paper will outline some of the research, testing, and investigation which has been done on half-through truss bridges. This research is primarily concerned with...
Research and Application of Various Joints of Space Grid Structures in China
This paper introduces the research work results and applications of various joints of space grid structures in China. It also gives out formulas for determining the loading capacity and...
Response of Truss Structures Subjected to Dynamic Loads During Member Failure
The paper presents a method for and results from an investigation of the response of a truss structure during the chain reaction of its member failure while subjected to external static...
Seismic Behaviour of Tall Guyed Telecommunication Towers
This paper presents results of a detailed numerical modelling study of two guyed telecommunication towers subjected to seismic excitation: a 107-m (350 ft) tower with six stay levels,...
Damage Prediction in Reinforced Concrete Structures under Cyclic Loading
Assessment of the stiffness, resistance and damage behaviour of reinforced concrete members under high cyclic loading due to earthquake actions must consider material nonlinear effects...
Blast Demolition of Reinforced Concrete Industrial Chimneys
On some of recently demolished chimneys, transient measurements were taken, in the vicinity of the tilting hinge, during the process of falling down. Thus, corresponding dynamic computational...
Continuous Pulse Control of Structures with Material Nonlinearity
A control method is presented for reducing the dynamic response of structures in the inelastic material range using a control force from an active control system. The proposed method of...
Sensitivity and Optimum Structural Design
Modern design requires more advanced considerations leading to light and safe structures. One of the way to reach this aim is through structural optimization. Today's computational possibilities...
Research of Strength and Deformations with Long-time Loading and the Use of Glassfiber Reinforced Concrete in Shells
Presented is an experimental research on the properties of behavior on compression and tension of glassfiber reinforced concrete of alkali-resistant glass fiber under long-time load and...
Return to search