Construction of an RCC Hardstand
Rapid-Setting PCC Pavement Patching Materials
Silicones?Space-Age Materials for Age Old Problems
Evaluation of Air Quality Methods in the Asbestos Work Area
Air monitoring is a technique that is routinely used to measure the level of asbestos in a given airspace. This technique has changed significantly since its first use in the asbestos...
Professional Liability on Asbestos Abatement Projects
When the engineer is retained on an asbestos abatement project, he or she must bring to the job and employ that degree of skill and learning ordinarily exercised in the profession in similar...
Health Hazards Associated with Asbestos Exposure: Implication for the Construction Industry
The paper presents some asbestos diseases: lung cancer, mesothelioma; gastrointestinal cancers; asbestosis. A historical perspective of asbestos-related diseases is given. The occupational...
Training Requirements for Asbestos Workers and Supervisors
Although the Federal Occupational Safety and Health Administration (OSHA) has stipulated that minimum training to be provided to asbestos abatement workers and their supervisors, some...
On the Post-Flutter State of Cable-Stayed Bridges
This paper deals with the post-flutter vibrations of cable-stayed bridges. An approximate theory and an approximate analytical solution method have been established. A numerical example,...
Burlington Cable-Stayed Bridge
The Burlington cable-stayed bridge will carry US34 over the Mississippi River from Burlington, Iowa to Gulfport, Illinois. There will be two 12-ft lanes in each direction plus an acceleration...
Quincy Bayview Bridge?Construction Control
A cable-stayed bridge crossing the Mississippi River at Quincy, Illinois, was completed in August 1987. The structure includes twin concrete towers and a hybrid deck section. The cable...
New Parallel Wire Bundle for Cable-Stayed Bridges
A parallel wire bundle is described which is twisted with a long lay length. It is corrosion protected by an inner fill and outer coating of polyurethane. It presents a specially shaped,...
The Wind Resistant Design of Cable-Stayed Bridges
Frequency Domain Site Response with Pore Pressure
A frequency domain analysis for seismic site response and liquefaction potential is developed. The analysis is based upon a nonstationary random vibration theory. The model uses an effective...
Probabilistic Prediction of Pile Group Capacity
A reliability analysis of a group of free standing piles in clay is carried out using Monte Carlo simulation. The pile material strength, soil capacity, and the load on the pile group...
Lateral Analysis of Drilled Piers Incorporating Soil Variability
In probabilistic studies, the mean or expected value of the parameter in question, along with its measured dispersion or standard deviation, are determined. In this study the Three Point...
A Stochastic Model for Low-Cycle Elastic-Plastic Fatigue Crack Growth
In this paper a stochastic process approach is considered to represent the random nature of the low-cycle (elastic-plastic) fatigue crack growth process. A semi-Markov renewal model is...
Recent Thoughts on Probabilistic Fatigue Crack Growth
We briefly review recent results of analysis of fatigue crack growth data. Implications of this analysis are presented, and reasons are advanced in favor of increasing the dimension of...
Modeling Fatigue Crack Growth Resistance, dN/da
In the fracture mechanics approach to fatigue, da/dN is correlated with the cyclic range of the stress intensity factor, ?K; the resulting relation, da/dN=f (?K), is commonly called the...
Stochastic Modeling of Fatigue Crack Growth
A new lognormal fatigue crack propagation model has been presented in which a two-dimensional state vector has been employed to introduce experimentally observed history dependence of...
Load Combinations for Codified Design
Loading requirements used in current standards for structural design are not consistent in their conceptual basis, appearance or use. Unified limit states design procedures for structures...
Return to search