LFRD Bridge Design as Viewed by the Designer
The load and resistance factor design (LFRD) design concept has been resisted by some bridge engineers on the grounds that it represents a reduction of the 'factor of safety'...
Evaluation of Corroded Steel Bridges
In the United States there is a large inventory of corroded steel bridges. The evaluation of these existing bridges is difficult when considering all the uncertainties involved in deterioration....
Overview of the Guidelines for T/L Structure Loadings
This section introduces a reliability based design methodology that forms the framework for the loading guidelines. A Load and Resistance Factor Design (LRFD) format is presented for the...
Three Automatically Erected Folding Spans
The U. S. Navy has identified three rapidly erected bridges. Each is capable of spanning 400 feet (120 m) with a 70 ton (63 tonne) live load at mid-span. Each will also fold into a 15...
Design of Steel Transmission Pole Structures
This document has been carefully prepared in an effort to provide an authoritative source of information about effective design and fabrication of steel transmission pole structures. The...
Measures Against Wind-Induced Vibrations of Bridges
The design of very flexible structures, such as long-span steel bridges, are frequently governed by wind-induced vibrations. This paper introduces the present situation of the cable-supported...
Structural Systems for Multispan Cable Suspended Bridges
Multispan cable suspended bridges, i. e. , cable-stayed or suspension bridges with a large number of consecutive main spans of equal size, must be carefully designed to become economical...
Development of a Double Tee Structural System for Highway Bridges
The fully precast, prestressed double tee beams are tied together by transverse post-tensioning through simple grout filled V-joints. The system provides for complete transversal continuity...
Micro=Lam? LVL: A New Alternative for Timber Bridges
Laminated veneer lumber (LVL) provides a unique opportunity to obtain large structural members from ever-smaller trees. It provides the added benefit of high treatability. This paper explains...
Wind Tunnel Aeroelastic Model Study of the Baytown Bridge (Steel Alternative)
Analytical and full bridge aeroelastic model studies performed to assess the aerodynamic stability of the steel alternative Baytown Bridge over the Houston Ship Channel are described....
Analysis and Design of Wind- and Earthquake-Resistance of an S-Curved Cable-Stayed Bridge
Just recently, in January of 1987, the first S-curved cable-stayed bridge in the world has been completed as a part of Metropolitan Expressway's Katsushika-Edogawa Route in...
Dynamic Behavior of Three J.S. Cable Stayed Bridges
Dynamic considerations in the design of three recently designed cable stayed bridges are discussed. The presentation includes analysis for eigenfrequencies and eigenmodes, assessment of...
The Far? Bridge?Long Life at Low Costs
The superstructure of the bridge is a steel structure which proved to be competitive compared to the tendered concrete solution, due to simple and rational design both structurally and...
Furrow Modeling with Variable Hydraulic Characteristics
A zero inertia furrow irrigation model was developed to run on an IBM-compatible micro-computer. The depth gradient term of the momentum equation is approximated by averaging over the...
General Considerations for Managing Floods and Droughts
Work described at this conference and future developmental work of water resource engineers will best contribute to professional improvement if such work is guided by appropriate objectives....
Are Soil Moisture Accounting Models Needed for the Real Time Forecasting of River Flows?
The difficulties inherent in using conceptual rainfall-runoff models in conjunction with filtering techniques, for the real time forecasting of river flows, are reviewed. The issue of...
Effect of Rainfall Intensity Distribution on Excess Precipitation
The effect of the time distribution of rainfall intensity on the prediction of the depth of excess precipitation is evaluated. A comparison is made of the excess precipitation produced...
Maximizing Utility of Interfaces for Hydrologic Models
From the time a watershed layout has been determined, there is sufficient information for a computer to generate a command sequence for hydrologic simulation. Recognizing this fact, an...
Seepage/Drainage Investigation Colusa County California
High groundwater in the late winter months saturates the soil profile, causing damage to both crops and soil. Sustained water logging severely damages or destroys orchards. It has generally...
On the Choice Between Annual Flood Series and Peaks Over Threshold Series in Flood Frequency Analysis
Statistical techniques are often used to estimate extreme flood events for the design of a flood-control structure or for any other flood-related purpose. Two kinds of models are commonly...
Return to search