Olmos Dam Modifications
(
Structural Safety
Future building codes will go far beyond the classical emphasis on dimensioning, calculations, and specification writing. Emphasis will shift from scientific thinking to strategic thinking,...
Some Proposals for Reducing Structural Failures
Illinois is one of the few states requiring a Structural Engineer's License: a P.E. alone is not enough to practice structural engineering there. Unfortunately, even in Illinois,...
Directional Wave Spectra Applications
These collected papers and their ensuing discussions presented at the September, 1981 symposium at the University of California on directional wave spectra applications examine the present...
Steel Structures Provide Flexibility
The steel structures of several major buildings are evaluated by the structural engineers responsible for the design and construction. Included are the Park Avenue Atrium in New York;...
At Four Western Stadiums, Wood Comes Out on Top
In recent years, several long-span timber roofs have been constructed atop large arenas and stadiums in the Western states. The choice of glued-laminated timber offers designers good economy,...
For Office Buildings: Long Span Concrete Slabs
A survey of 36 office buildings in the United States and Canada featuring long span concrete slabs showed concrete is a technically feasible and cost effective material for office structures....
Engineers Notebook: Checking Capacities of Eccentrically Loaded Columns on an Existing Bridge
This article focuses on the structural analysis of eccentrically loaded columns. A simple and novel graphical technique for determining the load-carrying capacity of the columns is presented....
Replacing Corroded Cables on a Cable-Stayed Bridge
The cable-stayed bridge across Venezuela's Lake Maracaibo is among the longest bridges of its type. But after years of service, corroded cables threatened to snap, which would...
Evaluation, Maintenance and Upgrading of Wood Structures
Prepared by the Subcommittee on Evaluation, Maintenance, and Upgrading of Timber Structures of the Committee on Wood of the Structural Division of ASCE. ...
The Fabricator/Designer Connection
What can the designer-fabricator team do to improve the overall function of design details? One of the best ways is to begin with team work by bringing the fabricator in on the project...
Gravity Sanitary Sewer Design and Construction
This Manual provides both theoretical and pracctical guidelines for the design and construction of gravity sanitary sewers. The initial chapter introduces the organization and administrative...
Protecting Post-Tensioning Tendons in Concrete Structures
Patterns of corrosion problems related to tendon systems are analyzed based on the author's experience in evaluating over 50 corrosion related performance problems in prestressed...
Selected Papers by Alfred M. Freudenthal
Civil Engineering Classics
Fifty-six papers written by Alfred M. Freudenthal, or co-authored by Prof. Freudenthal, are included. The papers are divided into three areas: structures, theories of mechanical behavior...
Tall Building Systems and Concepts
The structural, mechanical and electrical systems of tall buildings are explored. The eight areas of focus are, structural systems, mechanical and service systems, electrical systems,...
Dynamic Consolidation - Dramatic Way to Strengthen Soil
The dynamic consolidation technique consists basically of dropping a heavy pounder of up to 4 x 104 kg from a height varying between 50 to 148 ft....
The Structural Fuse: An Inelastic Approach to Earthquake-Resistant Design of Buildings
An alternative to the empirical approach to earthquake-resistant design of buildings is proposed and illustrated with a design example. Instead of strengthening every member to resist...
The ABC'S (and Q) of Cold-Formed Steel Design
Cold-formed structural members are steel components that have been put into their cross-sectional shape by cold bending of flat sheets. Local compressive buckling must be carefully considered...
General Principles for the Stability Design of Metal Structures
The Structural Stability Research Council (SSRC) Technical Memorandum No. 5 is explored; this memorandum includes the general principles that form the bases of various SSRC recommended...
Japanese Tunnel Design: Lessons for the U.S.
The Japanese construction industry has a great deal to offer regarding designs, methods, and procedures that can efficiently overcome the tough physical and environmental constraints encountered...
Return to search