Supplemental Irrigation by Runoff Farming: An Economic Assessment
A simulation model was used to evaluate the economic potential for using runoff farming techniques for growing grain sorghum at two locations in Texas. The results show that the yearly...

Land Management and Water Yield in the Appalachians
Watershed treatments on the Fernow Experimental Forest have included individual tree selection, commercial clearcutting, clearcutting upper and lower halves of watersheds, clearcutting...

Biodiversity in Riparian Communities and Watershed Management
Riparian communities are demonstrated to be regional centers of biodiversity and biomass. Examples are taken primarily from bird and lizard communities in the Southwest, since these vertebrates...

Stream Bank Stability Prediction for C6 Stream Type Reconstruction
A hydraulic model investigation will be conducted to evaluate the effects of root system characteristics of three meadow plant communities on simulated bank erosion. The test will determine...

Demonstration of Watershed Management Effectiveness in Sediment Control Using Comprehensive Watershed Modeling
The Arroyo Pasajero, which drains a 500-square mile watershed in the Coastal Range of California, flows into the San Joaquin Valley, intersecting the San Luis Canal section of the California...

Modeling Erosion and Effects of Agricultural BMP's on a West Tennessee Watershed
The application of Hydrological Simulation Program FORTRAN (HSPF) to nonpoint source data was examined. The model is used to determine the effects of land management practices upon surface...

ROTO?A Continuous Water and Sediment Routing Model
A model called ROTO was developed to estimate water and sediment yields on large basins (several thousand square miles). ROTO is a continuous model operating on a daily time step that...

Neutron Physics Considerations in Moisture Probe Design
Neutron physics can be used to characterize most of the know behavior of neutrons in the soil. Scattering, absorption and slowing down are the principal processes affecting moisture probe...

Factors Affecting Neutron Gauge Calibration
Neutron gauge characteristics and soil chemistry affect gauge calibration. External factors also influence gauge calibration and should be considered in the calibration procedure. Gauge...

Access Tube Characteristics and Neutron Meter Calibration
Neutron meter calibration was found to be influenced by material type, thickness and size of access tube. Meter counts were decreased by an average of 15% for a 20% increase in tube diameter...

Relationship of Soil Type and Chemicals to the Calibration of Neutron Meters
Theory of neutron scattering and moderation in matter explains many of the characteristics of calibration curves of neutron moisture probes. Characteristics include effect of atomic species...

Sprinkler System Design for Frost Protection
Both undertree and overtree systems for frost protection by sprinkling are currently being used. The criteria based on experimental results and theoretical modeling have been reviewed...

Infiltration or Roughness from Surface Irrigation Advance
Over the past several decades, a significant effort has gone into the development of mathematical models of water flow over the soil surface. Significant progress has been made in prediction...

Upgrading of the Orange Cove Irrigation District Water Distribution System
The Orange Cove Irrigation District covers about 28,000 Acres in the Central Valley of California. It is supplied from the Friant-Kern Canal. A semi-closed low pressure pipeline system...

Conjunctive Use of Surface and Groundwater
A computer model was developed by T. Sammis and Z. Samani to simulate the conjunctive use of surface and groundwater. The model consisted of a groundwater simulation subroutine and a crop...

Using Neutron Probes to Aid Irrigation Scheduling
Neutron soil moisture measurements are used to supplement irrigation forecasts on the 60,000 acre sprinkler-irrigated Navajo Indian Irrigation Project (NIIP). Weekly irrigation forecasts...

Performance Measures for Irrigation Water Delivery
Performance measures are developed which facilitate analysis of irrigation water delivery systems in light of the objectives of adequacy, efficiency, dependability and equity and of water...

Measurement of Irrigation Water Use: Results of Two Case Studies in Illinois
Three methods of measuring and estimating irrigation pumpage were used during two research studies attempting to assess ground-water use. These three methods: (1) farmer estimates; (2)...

An Assessment of Input Variables to the Penman-Monteith Equation Using Canopy Reflectance Measurements
Observing the form of the Penman-J.L. Monteith equation, it can be seen that several terms could be potentially estimated from remotely sensed data. These include: net radiation, canopy...

Canal Automation for Flexibility on Sloping Canals
This project and tested a method which would allow flexible water deliveries from medium-large canals. The canal gate movement algorithm CARDD (Canal Automation for Rapid Demand Deliveries)...

 

 

 

 

Return to search