Rockfill Compression Tests and Other Aspects of the Design of Miel I Dam
The Miel I Dam, a high concrete face rockfill dam, is one of the main structures designed for the Miel I Hydroelectric Project in Colombia. Selection of dam type was based on technical...
The Design of Macagua Concrete Face Rockfill Dam
This article describes the design characteristics of the concrete face rockfill dam at Macagua, which will have a total length of about 9,200 ft (2,800 m), an average height of 66 ft (20,0...
Low Cement Content High Strength Concrete
The fundamental objective of this research project was to develop mix design information for structural grade concrete using high fly ash content. The fly ash used in this project was...
Advances in Fiber Reinforced Concrete
The idea of using strong discontinuous fibers as reinforcement for concrete seems to have been both a seduction and a challenge to many civil engineers. Adding the reinforcement to the...
Effect of Steel Fibers on the Cracking Behavior of Reinforced Concrete Continuous Beams
A research program was conducted with the aim of studying the cracking behavior of reinforced concrete continuous beams, as it is affected by using different combinations of main steel...
Rational Design of Beam-Columns in Steel
The paper discusses the procedure as currently recommended in the AISC Manual for selection of beam-columns in steel and points to the inadequacy of this procedure for quick convergence...
Unsymmetrically Reinforced Concrete Columns
The development of column strength formulas for unsymmetrically reinforced sections has been developed in previous papers. However, aids such as interaction diagrams have not been available...
Towards Rational Design of Structural Members in Reinforced Concrete
With the increasing emphasis on cookbook designs, plug-in and punch-in formulas, and punch-in numbers in the personal computer program, there is a danger that the designer may accept the...
A Summary of the Seismic Qualification Utilities Group (SQUG) Program
In December of 1980, the Nuclear Regulatory Commission (NRC) initiated Unresolved Safety Issue (USI) A-46 to address the question of the seismic adequacy of equipment in 49 operating nuclear...
Obtaining Reliable Data from Fragility Tests
The parameters discussed in this paper are the same as those present in normal seismic qualification testing. These parameters behave differently in high level acceleration tests and their...
Earthquake Experience Data on Power and Industrial Structures: Applications to Seismic Design and Evaluation
An extensive study was conducted to document the seismic performance of typical power plant and industrial structures in selected recent strong earthquakes and to correlate the performance...
Aseismic Capability Prediction from Failure Data
Forensic engineering evaluations of failures have produced a wealth of technical data. In this paper, evaluation of representative failure data from one practitioner provided relevant...
Impact on Test by Various Multiaxis Excitation
The purpose of this paper is to provide input guidelines in evaluating various types of multiaxis excitation on fragility level testing of electronic devices. There are many variables...
Seismic Design-Qualification of Non-Safety Related Items in Safety Related Envelope
This presentation pertains to Seismic Design-Qualification for those portions of structures, systems, or components in a Nuclear Plant whose continued function is not required but whose...
Design of Structures to Resist Nuclear Weapons Effects
This manual provides guidance to engineers engaged in designing facilities intended to resist nuclear weapons effects. Although emphasis is placed on blast-resistant design, other effects...
Probabilistic Basis for Design Criteria in Reinforced Concrete
This collection of papers presents the results of research on the variability of reinforced concrete members carried out at the University of Alberta, Edmonton, Canada, during the period...
Connection Flexibility and Steel Frames
The papers included in this book introduce and present methodologies for the analysis and design of frames which take into account the effect of joint flexibility on the response characteristics...
Rehabilitation, Renovation, and Reconstruction of Buildings
This document constitutes the proceedings for a National Science Foundation funded workshop to discuss research needs pertaining to the buildings side of infrastructure. It includes discussion...
Fracture Problems in the Transportation Industry
Six cases of damage tolerance assessment are presented, involving structures or vehicles in the U.S. transportation industry. Damage tolerance means arranging design, maintenance, and...
Damage Mechanics and Continuum Modeling
Historically, the structural and mechanical engineers are conditioned to model a material in a purely phenomenological sense with little or no regard to underlying physical phenomenon...
Return to search