Three-Dimensional Fracture Process Zone Detection in Concrete
Process zones in concrete have been under intensive investigations during the past several years. Techniques have successfully been used to detect and map the 2-D superficial process zone....
Stochastic Modeling of Fatigue Crack Growth with Retardation
This paper develops a new methodology for modeling fatigue crack growth accounting for both material inhomogeneity and the random nature of the loading process by modeling the crack growth...
Probabilistic Micromechanics in Constitutive Modeling of Granular Material
This paper gives a review of newly developed probabilistic methods for analysis of the effect of randomness in geometry and physical properties at the microscale on their macroscale response...
Modal Coupling Effect of Non-Classically Damping
The equations of motion of a structure in undamped modal coordinates may have non-zero off-diagonal terms in the damping matrix. Although these terms are commonly neglected, studies have...
On the Modelling of Damage Due to Volumic Variations in Cementitious Composites
Two kinds of volumic variations are considered. Those due to thermal gradients on hardened concrete and those due to hydration processes at early ages. Models based on damage mechanics...
Nonstationary Response Characteristics of Linear MDOF Systems
A new approximate methodology for nonstationary random vibration analysis of multi-degree-of-freedom linear systems is developed. Simple analytical expressions for the covariance response...
Random Initial Heterogeneity and Degradation in Brittle Materials
The question of implementation of the initial state of the material is addressed. The problem is tackled by assuming random initial values for a relevant variable, within a prespecified...
Analog Electronic Simulations of a Nonlinear System
We perform electronic analog simulations of a harmonically forced Duffing oscillator. The addition of noise perturbations of sufficient intensity is shown to induce transitions between...
Systolic Anterior Motion of the Mitral Valve: In Vitro Flow Studies
Using an in-vitro approach, the goal of this study was to determine and to characterize the mechanism of systolic anterior motion of the mitral valve in obstructive hypertrophic cardiomyopathy....
Flow Visualization Studies in the Novacor Left Ventricular Assist System
This paper discusses a series of experiments to visualize and measure flow fields in the Novacor left ventricular assist system (LVAS). The experiments utilize a multiple exposure, optical...
Computational Gradient Plasticity
The inclusion of higher-order deformation gradients is of paramount importance for properly describing strain localization within the framework of continuum mechanics. In this contribution...
Discrete Markov Process Approach to Fatigue Crack Growth
The discrete Markov approach considered herein is simple to implement and uses a two-dimensional stochastic model in conjunction with simulation to estimate model parameters. The possibility...
Stochastic Mixed Finite Difference Method
Some aspects of numerical solutions of stochastic mechanics problems are considered. The Finite Difference method for discretization of stochastic continuous media problems is discussed....
Structural Control Under Stochastic Seismic Loads
This paper presents a method of controlling nonlinear and hysteretic civil engineering structures subjected to stochastic earthquake ground excitations. Emphasis is placed on control of...
Pressure Losses Across Sequential Stenoses in Collapsible Tubing
The fluid dynamics of a model of a diseased artery with multiple stenoses were investigated in a recirculating steady-flow system over a range of Reynolds numbers (Re) from 30 to 1100....
Pulmonary Artery Velocity Profiles in Young Lambs
This report describes progress made in our laboratory in examining pulmonary artery velocity patterns in normally maturing lambs. Lambs from four age groups were selected for study--2...
Stochastic Finite and Boundary Elements
The random coefficients in partial differential equations, which govern the responses of stochastic thermo-mechanical systems, (Dasgupta, 1991), pose a computational challenge. The large...
Finite/Macroelement Meshes in Neural Rat Growth
The well known attributes of neural rat growth during 7 to 14 days postnatally are used to demonstrate the decrease in calculated growth discontinuities with macro, as opposed to finite,...
Form Comparison Without Anatomical Landmarks
The mathematical basis for various morphometric interpolating techniques is discussed. A technique, which enables analysis of biological forms without homologous anatomical landmarks,...
Inverse Problems in Biomechanics
The FEM (Finite Element Method) is a powerful numerical technique in solving boundary value problems in Biomechanics, which are difficult to analyze by other closed form or numerical procedures...
Return to search