Verification of Local Modes in a Two-Dimensional Tidal Model
Based on a generalized model equation, a two-dimensional hybrid finite element model has been developed to study tidal waves of incompressible, homogeneous fluid in rotational flows. In...
Convergence Experiments with a Hydrodynamic Model of Port Royal Sound, South Carolina
A two-demensional, depth-averaged, finite-difference, flow/transport model, SIM2D, is being used to simulate tidal circulation and transport in the Port Royal Sound, South Carolina, estuarine...
Validation and Intercomparison of Three-Dimensional Numerical Models of Estuarine and Lake Hydrodynamics
Three-dimensional numerical models have been developed and used to study the circulation and transport of water quality parameters in estuaries and lakes. This paper discusses two important...
SWMM Application in Indian River County, Florida
The EPA's Storm Water Management Model (SWMM) was used to simulate drainage canal system network within Indian River County, Florida. Runoff and Extran module of the PCSWMM...
Modeling Variations in Soil Moisture and Streamflow Resulting from Climatic and Land Use Changes
A distributed parameter watershed model IWASCH has been developed to simulate variation in soil moisture and baseflow conditions for agricultural areas in Illinois, resulting from climatic...
Application of Hydrodynamic and Water Quality Models at a Superfund Site in Montana
The water quality model applied to the site is the EPA-supported hydrodynamic and water quality model WASP4 with a modification to enable it to better simulate riverine systems. To provide...
The Colorado River Simulation System
The Colorado River Simulation System (CRSS) is a comprehensive computer tool designed to assist water resource managers in long-range planning and management of the Colorado River Basin....
An Analytical Solution to Verify a Nonlinear Tidal Circulation Model
The governing equations for this study are the shallow water equations including convective terms. Oscillations of free surface are assumed important in comparison to the total water depth....
Implementation of a Hydrodynamic Model for the Upper Potomac Estuary
A vertically integrated, two-dimensional hydrodynamic/transport model has been implemented for the upper extent of the Potomac Estuary between Indian Head and Morgantown, Md. The model...
Models vs. Methods in Urban Drainage Calculation
This paper summarizes the findings of a recent study at Penn State aimed at recommended hydrologic techniques for small developing watersheds. The specific desk-top methods investigated...
Comparison of Tenn-V and TR-55 on TVA Watersheds
The storm hydrograph simulation models TENN-V and TR-55 were compared as to their respective abilities to reproduce 468 storms observed on 54 watersheds. TR-55 did not represent the Tennessee...
Estimating Urban Flood-Frequency Characteristics
Methods in use by the U.S. Geological Survey to estimate flood-frequency characteristics for urban watersheds are compared with estimates based on the Soil Conservation Service TR-55 model....
Urban Watershed Data for the United States
The contents of an urban watershed data base compiled for a national urban flood-frequency study by the U.S. Geological Survey are described. The data base includes information for 269...
Experience with Cavitation in High Pressure Slide Gates
The Bureau of Reclamation has many years of experience in the design and operation of high pressure slide gates. This paper discusses the historical use of high pressure slide gates by...
Design and Operation of Guard Gates
Guard gates for hydroelectric intakes and low-level outlets are normally intended for operation only under balanced heads. In the case of failure of regulating gates, the guard gate may...
Handling of Intake Bulkhead at King Talal Dam
During raising of King Talal Dam in Jordan in 1986, the existing intake wheel gate provided at the inlet of the project Low Level Outlet Works (LLOW) tunnel was found inadequate to withstand...
Model-Prototype Comparison of the Bay Springs Lock, Tennessee-Tombigbee Waterway, Mississippi
A comprehensive prototype evaluation of the Bay Springs Lock, Tennessee-Tombigbee Waterway, Mississippi, was conducted by the Hydraulics Laboratory, Waterways Experiment Station (WES)....
Model Study of New Bonneville Lock
The filling and emptying system of the New Bonneville Lock was designed by the US Army Engineer District, Portland. The lock will be 86 ft wide by 675 ft long, with a design lift of 69.5...
Hydraulics of Side-Channel Weirs for Regional Detention Basins
Side-channel weirs can be used for diversion to reduce flood peaks. A 1:25 scale model was built to investigate the hydraulic characteristics of embankment-shaped side-channel weirs. Results...
Global Climate Change?Implications for Large Water Resource Systems
Prospects of global climatic change resulting from the greenhouse effect are causing increasing concern. Predicted increases in average global temperatures are likely to be accompanied...
Return to search