Computer-Integrated Construction
Computers have been used quite successfully as replacements for manual drafting, but to stop there seriously underuses the potential of computer aided design. By using the computer's...

The Key is Constructability
Construction generally involves the collective efforts of owners, designers, contractors and suppliers. During the design phase, the engineer should be mindful of such critical elements...

Advances in Cement and Concrete
This proceedings, Advances in Cement and Concrete, consists of papers presented at the Engineering Foundation Conference held in Durham, New...

In Rehab We Trust
Glulam structures will be durable and last for a long time provided structural elements are protected from water and moisture. Once water is allowed to come into direct contact with glulam...

America's Pavements: World's Longest Bathtubs
Pavements are the most unusual structures designed by civil engineers. Water flows through their tops, bottoms and sides but because pavements are relatively flat, flows out again very...

Cement Manufacture and Use
This book, Cement Manufacture and Use, consists of papers presented at an Engineering Foundation meeting held in Potosi, Missouri. These papers...

Existing Sewer Evaluation and Rehabilitation
This manual, Existing Sewer Evaluation and Rehabilitation, Second Edition, provides general guidance and serves as a source of information...

Stiffness of Low Rise Reinforced Concrete Shear Walls
This report, Stiffness of Low Rise Reinforced Concrete Shear Walls, was prepared by the Working Group on the Stiffness of Concrete Shear Wall...

Focusing on Fatigue
Properly designed and maintained bridges sometimes need repair for fatigue damage. Among the reasons may be that the bridge was designed before current fatigue design provisions, or initial...

Dredging '94
During the past decade, the discipline of dredging has been challenged in the areas of economics, the environment, and management of dredging projects. Dredging has kept pace with its...

Infrastructure
New Materials and Methods of Repair
This proceedings, Infrastructure: A New Materials and Methods of Repair, contains 146 papers presented at the Third Materials Engineering Conference...

Standard Practice for Concrete for Civil Works Structures
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 8 This manual provides guidance for the investigation...

Improving Development Characteristics of Reinforcing Bars
Prepared by the Civil Engineering Research Foundation. Sponsored by CERF, This report describes the development and implications of a new concrete...

Materials for Tomorrow's Infrastructure
A Ten Year Plan for Deploying High Performance Construction Materials and Systems (Executive Report)
Prepared by the Civil Engineering Research Foundation. This executive report presents a high-level, policy-oriented summary of the High-Performance...

Materials for Tomorrow's Infrastructure
A Ten Year Plan for Deploying High Performance Construction Materials and Systems (Technical Report)
Prepared by the Civil Engineering Research Foundation. This report presents a detailed program to transform our nation's infrastructure....

Probing the Port of Los Angeles
Geotechnical investigations can uncover nasty surprises. When conducted after the preliminary design, the results can force significant and costly changes or�even worse�lengthy delays....

Questioning Composites
Steel, concrete and timber are, of course, the most commonly used construction materials. Composites, or fiber reinforced plastics, have been used in specialty applications in construction...

Building Code Requirements for Masonry Structures (ACI 530-92/ ASCE 5-92/TMS 402-92); Specifications for Masonry Structures (ACI 530.1-92/ ASCE 6-92/TMS 602-92); Commentary on Building Code Requirements for Masonry Structures (ACI 530-92/ ASCE 5-92/TMS 402-92); Commentary on Specifications for Masonry Structures (ACI 530.1-92/ ASCE 6-92/TMS 602-92)
Copublished with American Concrete Institute (ACI) and The Masonry Society (TMS) Building Code Requirements for Masonry Structures,...

Development of Mechanized Wet Mix Shotcrete Application in Norwegian Tunnelling Industry
From 1971 to 1980 wet mix shotcrete won the Norwegian market 100%. In the same period hand held spraying was replaced by hydraulic manipulators. From 1980 to 1986, steel fibre use increased...

Wet Mix Shotcrete Used in Subsea Tunnel Environments
To reject the claim that the use of accelerator in shotcrete reduces the compressive strength with time, lately cored samples were taken from an 18 to 19 years old concrete. A wet mixed...

 

 

 

 

Return to search