Probabilistic Mechanics and Structural and Geotechnical Reliability
This proceedings consists of summary papers for the thirty-six technical sessions of the 6th ASCE Specialty Conference on Probabilistic Mechanics, and Structural and Geotechnical Reliability....
Use of Manned Submersibles to Investigate Slumps in Deep Water Gulf of Mexico
The Johnson-Sea-Link manned submersible was used to investigate surface slumps in the deep water Gulf of Mexico. High quality and specifically placed seafloor cores, video tapes, 35 mm...
Use of X-Ray Computed Tomography in the Study of Marine Sediments
X-ray computed tomography (CT scanning) is primarily a medical imaging technique. When applied to marine sediments, it responds predominately to the spatial density distribution within...
U.S. Sludge Digesters: From Pancakes to Eggs
Egg-shaped anaerobic sludge digesters, used extensively in Germany and Japan, cost more to build, but provide better mixing of sludge, require less maintenance and less energy to operate,...
Radar Monitoring of Ice on the Upper Niagara River
A standard marine radar was used during the winter of 1987-88 to evaluate its potential to monitor the presence and movement of ice in the Grass Island Pool area of the upper Niagara River....
Earth Walls: Making the Right Choice
Earth walls are retaining walls where the ground assumes a load-bearing role. These walls either support compacted earth (embankment-type reinforced compacted earth walls such as Doublewal...
Designing for Corrosion Control
This presentation will discuss designing from several aspects: a. Designing of the item to lessen the affects of corrosion. b. Selection of non-corrosive materials in the designing process...
Advanced Composites Materials in Civil Engineering Structures
This proceedings of the Specialty Conference on Advanced Composites Materials in Civil Engineering held in Las Vegas on January 31?February 1, 1991 contains 40 papers from ten technical...
Removal of Dissolved and Suspended Radionuclides from HWVP Liquid Wastes
It was determined during Preliminary Design of the Hanford Waste Vitrification Plant that certain intermediate process liquid waste streams should be decontaminated in a way that would...
Durability, Mechanical, and Thermal Properties of Experimental Glass-Ceramic Forms for Immobilizing ICPP High Level Waste
The high-level liquid waste generated at the Idaho Chemical Processing Plant (ICPP) is routinely solidified into granular calcined high-level waste (HLW) and stored onsite. A research...
Exclusion of Foreign Materials from the Savannah River Site (SRS) Canistered Waste Forms: Characterization of the Gas within the Free Volume
Glass-filled canisters, produced at the SRS Defense Waste Processing facility, must meet the Waste Acceptance Preliminary Specifications (WAPS) developed by DOE's Office of...
Analysis of Solute Transport in an Intermediate-Scale Unsaturated Flow Experiment
A simplified stochastic model was derived and applied to two unsaturated flow experiments conducted in an intermediate-scale caisson. Parameters for the flow and transport models were...
A Model for Effective Intergovernmental Planning
Effective intergovernmental planning processes are essential to the resolution of potential affects created by federal projects. In this paper, two successful planning efforts are described....
Risk Assessments for the Design of Subsurface Openings
A probabilistic approach was introduced to assess the risk of structural instability due to rock joint systems in rock mass, where subsurface openings are excavated, such openings as shafts,...
Assessing Impacts on Biological Resources from Site Characterization Activities of the Yucca Mountain Project
An integrated impact assessment program was developed to monitor the possible effects of Site Characterization Activities (SCA) on the biological resources of the Yucca Mountain area....
Site-Generic Approach for Performance Assessment of HLW Disposal System in Japan
This paper presents an overview of the preliminary performance analyses and description of R&D activities designed based upon the results of the analyses, which are to be incorporated...
Effect of Camera Geometry on Thermographs for Pavement Crack Detection
The research focused on the effects of camera heights and tilt angles on the ability to detect cracks in thermographs obtained with an infrared camera. Results indicate that differences...
Analysis of Thermal Scanning Imagery to Investigate Point Inflows Into Surface Water Bodies
Using a modified technique of thermal infrared remote sensing, physical sampling, and data analysis (graphical and geostatistical) locating a small inflow to a lake was possible. Thermal...
Infrared Thermography Based Pipeline Leak Detection
Computerized Infrared Thermographic pipeline inspection is now a refined and reliable process having been thoroughly proven to be an accurate, cost effective, and efficient technology...
A Perfect Base for a GIS: The Digital Orthophoto
A digital orthophoto is a rectified image with no relief displacement or radial distortion inherent in an aerial photo. One advantage of a digital orthophotography is that it can be used...
Return to search