On a Micromechanical Basis of Stochastic Constitutive Laws
A procedure for derivation of stochastic constitutive laws is outlined on the basis of graph-representable linear elastic microstructures. Central to the procedure is the concept of a...
Nonlinear Behavior of Thin Slender Free Surface Non-Newtonian Elliptical Rings
This paper analyzes the nonlinear motion of a slender concentric thin elliptical ring of an incompressible, non-Newtonian fluid. This study includes the physical effects of surface tension,...
Laser Interferometric Characterization of Acoustic Emission Transducers
The characterization of the exact response of commercially available, piezoelectric and thin film, acoustic emission transducers is of fundamental importance for the nondestructive evaluation...
Soil Behavior from Unconventional Loading Conditions
Random and sinusoidal loading conditions were used in this study to determine the soil moduli and the damping ratios of cohesive soil samples. Test results showed some differences between...
Mechanical Response of Cellular Materials Used in Waste Shipping Containers
Material behavior of impact limiters such as aluminum honeycombs and polyurethane foams has been studied experimentally. Four densities of aluminum honeycombs were tested: 3, 8, 12, and...
Multiple Modes of Steady-State Slide-Rock Response
The dynamic response of free standing rigid bodies to base excitation can be quite complex, as evidenced by the five motions or modes to be considered in a two-dimensional analysis: rest,...
Frictional Aspect of Rocking-Sliding of a Rigid Block with Surface Impact
During the very short time of impact between a rigid rectangular block and a rigid foundation, the interface pressure distribution varies with time in a complicated manner. Due to this...
Basic Aspects of Damage Mesomodelling
The basic aspects of a general damage computational approach which enable to simulate the complete fracture phenomenon are presented. It is a semi-discrete modelling where the material,...
Damage Mechanics Modeling of the Cyclic Behavior of Plain Concrete
The sudden stiffening behavior of concrete under cyclic loading is discussed and the available experimental investigations to delocalize damage is reviewed. A discussion on the applicability...
Three-Dimensional Thermal Jump in Stratified Cooling Channel
This study is concerned with basic properties of three-dimensional thermal jumps. Temperature measurements obtained in three-dimensional thermal jumps are presented. The jumps analyzed...
Neural Network Modeling of the Mechanical Behavior of Sand
Given a set of triaxial test data, an artificial neural network (ANN) has been trained to model the mechanical behavior of a medium-to-fine sand. Once trained, the ANN was tested by simulating...
Probabilistic Micromechanics in Constitutive Modeling of Granular Material
This paper gives a review of newly developed probabilistic methods for analysis of the effect of randomness in geometry and physical properties at the microscale on their macroscale response...
Joint Network Modeling and Scale Effects in Rock
Joint networks play a vital role in the mechanical and hydraulic behavior of rock masses. A realistic representation of joint geometry in rock masses and correct understanding of the mechanical...
Constitutive Modeling for Material with Perfect Disordered Heterogeneity
Finite element analysis with large number of elements are performed to simulate perfect disordered heterogenous material. The probabilistic nature of the micromechanical behavior of the...
Strain-Based Damage Deactivation in Concrete
Motivated by the 'mode I' microcrack opening and closing mechanism, a procedure for the deactivation of the damage is developed. Strain based projection operators are used to negate the...
Resonant Column Testing of Dynamic Rock Properties
Critical parameters for geophysical wave propagation studies are the dynamic elastic properties (shear and Young's moduli, and Poisson's ratio) and the intrinsic material damping of rocks....
Retrospect and Prospect: Micromechanics
In the mechanics community the term micromechanics is often used to identify scientific efforts in which certain overall macroscopic material response and failure modes are characterized...
Wave Propagation in Solids
The last fifty years have seen the development of a large number of application of the theory of wave propagation in solids to problems of interest to civil engineers. Most notable have...
A Hydraulic Study of Venous Valve Closure
The functions of the veins is to convey blood from the periphery to the heart. The distribution and transportation of blood between different parts of the body is regulated by a host of...
Mathematical Characterization of Fabric and Its Use in Mechanics of Geomaterials
Increased evidence of the influence of their discrete nature on the observed behavior of geomaterials has prompted a number of investigators to look at these materials at the microstructural...
Return to search