Lateral Stress Measurement During Cone Penetration
A lateral stress sensing cone penetrometer (LSSCP) was designed and fabricated. Based on the results of calibration chamber tests in sand, relationships between measured lateral stress,...

Relative Landslide Susceptibility in Davis County, Utah?A Multivariate Approach
The complex distribution of soil properties makes prediction of slope stability extremely difficult in these mountain watersheds. The need to assess these watersheds for their susceptibility...

Making Water System Rehabilitation Decisions
Making decisions regarding water distribution systems has always involved a great deal of judgment due to the complexity of the decisions involved. This paper presents a framework for...

Model for Optimal-Risk Based Water Distribution Network Design
Various models using a variety of optimization techniques were developed for determining pipe diameters, network layout, pump capacities, and other design parameters. The objective function...

Traveling Trickler Center Pivot Design
There have been a number of proposals to improve the center pivot irrigation system in order to overcome the inherent inefficiency from high evaporation losses and energy requirements....

Grand Canyon Water Line by Directional Drilling
The South Rim Village at Grand Canyon National Park obtains its water supply from a point called Roaring Springs which is located approximately 15 miles across the Canyon on the North...

The Past, Present & Future of Earthmoving Scrapers
This paper is a summary of the history and development and use of earthmoving scrapers. It will also take a look at the future of this type of machine. We'll build the discussion...

Use of In Situ Tests in Geotechnical Engineering
In the past ten years, many new types of in situ test equipment and many new techniques have been developed. The papers in this volume are concerned with applications of in situ measurement...

A Study of Exterior Facades?Problems and Solutions
The quality of the exterior facades of a building is important to maintaining aesthetic image, protecting the interior environment from infiltration of heat, cold, moisture, wind, and...

Ice Forces on Bridge Piers
The force that river ice exerts on bridge piers has been studied in the field and with models in the laboratory. Ice forces are a function of the strength, thickness, failure mode and...

Continuous Loading Consolidation Testing Using a Microcomputer for Control and Data Acquisition
An overview of some of the methods of one-dimensional consolidation testing currently in use is presented, including the load-increment test, the constant rate of strain test, the constant...

The Concrete Diagonal
Onterie Center in Chicago, Fazlur Kahn's last major structural design, is a companion in concrete to the diagonally braced steel John Hancock Center. It is a mixed-use building...

Designing for Flow
Geotextiles used for in-plane drainage can carry surprisingly large amounts of water within their structures. These composite drains, known as sheet drains, prefabricated drainage composites...

China Builds Record Bridge
China's Hanjiang Railway Bridge has a 1,000 ft (305 m) long main box girder and is the longest bridge of its type in the world. The steel box girder bridge is built with a...

The OCEANWHEEL Artificial Island
The compression rim and tension spoke structural system (OCEANWHEEL) transfers lateral loads from sea surface to seafloor efficiently. It promises a wide variety of uses beyond the described...

Porewater Pressure in Clays Below Caisson Islands
Unfrozen lightly overconsolidated clays are a significant factor in the design and performance of exploration caisson retained islands in the Canadian Beaufort Sea. At two sites (Tarsiut...

Soil Strength Determinations from the Cone Penetrometer Test
Geotechnical exploration in offshore Arctic regions often relies upon the electric Cone Penetrometer Test (CPT) because of its speed, economy, data continuity, and general reliability....

Arctic Penetration Test Systems
Geotechnical exploration in offshore arctic regions relies upon the electric Cone Penetrometer Test (CPT) because of its speed, economy, data continuity, and general reliability. By adding...

Analysis of a Production Well Through Sediments Containing Gas Hydrates
In some of the petroleum reservoirs recently discovered north of the Arctic Circle, production wells extend through thick permafrost. Several authors have reported zones of gas hydrate...

The Deformation Properties of Warm Underocean Permafrost
Two quasi-conventional incremental pressuremeter tests were carried out on man-made specimens of 'warm' ( minus 3 degree C) frozen, saturated sand. Instead of...

 

 

 

 

Return to search