Design, Construction, and Maintenance of Relief Wells
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 3 This engineering manual provides guidance and information...
Evaluation of Depth-Limited Wave Breaking Criteria
Numerous criteria exists for predicting incipient wave breaking. These criteria were verified with a limited number of data sets or under limited number of data sets or under limited beach...
Design of an In-Situ Directional Wave Gage for One Year Deployments
This paper describes the design and implementation of a new in-situ, directional wave gage that records hourly directional spectra continuously during a 13-month deployment period. If...
Design and Testing of the NDBC Wave Processing Module
The U.S National Data Buoy Center (NDBC) has developed a new wave data acquisition and processing system, called the Wave Processing Module (WPM), using state-of-the-art technologies and...
Buoy Directional Wave Measurements Using Magnetic Field Components
Directional wave data can be estimated using the heave, pitch and roll motion of a discus buoy, which are conventionally measured by a pitch-roll sensor. To reduce the size and cost, this...
Evaluation of a Third-Generation Wave Model for the U.S. Atlantic Coast
Accurate description of surface wind fields in ocean spectral wave modelling is of critical importance to estimating storm - induced wave conditions along a coastal reach. A new approach...
Wave Monitoring in The Southern California Bight
An overview of recent research by the Coastal Information Program (CDIP), aimed at effectively monitoring wave conditions in the Southern California Bight, is presented. The topographic...
Experimental Study of Monochromatic Wave-Ebb Current Interaction
Laboratory experiments were conducted in a 26-m by 36-m basin with a 1:30 plan beach to study the interaction of monochromatic waves and an ebb current in and near shallow entrance channel....
Wave Runup on and Wave Reflection from Coastal Structures
Wave runup and wave reflection are two of the most important, easily quantifiable variables that influence the design of coastal structures. Unfortunately there are very few comprehensive...
Wave Transformation and Load Reduction Using a Small Tandem Reef Breakwater ? Physical Model Tests
The performance of several small reef breakwaters, and a tandem breakwater system (consisting of a reef breakwater positioned upwave from a surface-piercing main breakwater), are quantified...
Robotics for Challenging Environments
This volume,
Estimating Clay Liner and Cover Permeability Using Computational Neural Networks
The ability to provide a quick estimate of the permeability value to be expected in laboratory testing (of field samples) would help to predict potential problems in meeting the permeability...
A program for the Analysis of Pile Load Tests
The load capacity of piles are routinely determined from full scale pile load tests under actual field conditions. Several empirical methods were proposed for the analysis of field load/settlement...
Analysis of I-Girder Highway Bridges
Analysis of a bridge superstructure is complicated by the general geometric and loading conditions. Presented in this paper are three dimensional finite element modeling techniques used...
Design and Implementation of a Database for Seismic Evaluation of Structures
The seismic evaluation of large structures, such as bridges, requires a comprehensive framework for managing the data. An evaluation typically involves the dynamic analysis of a number...
Characteristics of the US Highway Bridge Population
Characteristics of US highway bridges are summarized, and conditions of national, regional, and state bridges are analyzed with respect to structural deficiency. The overall patterns in...
Seismic Analysis of Reinforced Concrete Building Using Finite-element Techniques
The response of a reinforced concrete building subjected to earthquake loading has been obtained on a personal computer using the finite-element code STARDYNE. For preliminary design,...
Seismic Evaluation of the Macy Street Bridge, Los Angeles, California, Using 3-D Nonlinear Pushover Methodologies
Nonlinearity of the overall bridge response has begun to be incorporated in the design process through a method known as nonlinear static pushover analysis, and this step is now being...
Nonlinear Analysis and Experimental Validation of a Stiffening Truss Chord of the Golden Gate Bridge
Finite element analyses of a stiffening truss chord of the Golden Gate Bridge were conducted by the authors as part of a comprehensive seismic retrofit project conducted by T. Y. Lin International...
A Knowledge-Intensive Database System for Making Effective Use of Construction Lessons Learned
The Constructability Task Force of the construction Industry Institute (CII) sponsored as series of studies which advocate construction expert input to the conceptual planning, engineering...
Return to search