Comparison of the SPT,CPT, SV and Electrical Methods of Evaluating Earthquake Induced Liquefaction Susceptibility in Ying Kou City During the Haicheng Earthquake
The capability of SPT, CPT, Shear Wave Velocity and Electrical methods to evaluate earthquake induced liquefaction susceptibility of soil deposits consisting of sensitive clayey silts...
Seepage Studies Using Tracers and the Self Potential Test
Mill Creek Dam, a homogeneous silt structure resting on a conglomerate foundation, has experienced severe 'seepage since its construction in 1941. In 1981, a concrete cutoff...
Analysis of Liquefaction Potential by Insitu Testing
This paper describes the results of insitu testing performed to assess the liquefaction potential of a sand formation at a site for a proposed large industrial facility in East Central...
In Situ P and S Wave Velocity Measurement
A review of the in situ techniques to measure P and S wave velocities by seismic wave propagation is presented. A relatively new technique, the suspension PS logging method, is described...
New Developments in HEC Programs for Flood Control
Since the Hydrologic Engineering Center (HEC) started in 1964, the evolution has been toward packaged programs that perform a variety of computation options. Two examples are the flood...
Effect of the Fluid Velocity on the Biofilm Development
In order to get basic information concerning the application of a biological treatment to the ammonia nitrogen removal from drinking water, we considered the relation between the biofilm...
Strudel Scour: An Arctic Seafloor Scouring Process
Strudel scour is an arctic phenomenon which occurs every spring when the fresh-water rivers melt and inundate the sea ice cover of the arctic sea. This fresh water flowing out over the...
MILHY?A Microcomputer Based Hydrologic and Hydraulic Model
MILHY is an interactive, single event, lumped parameter model used to estimate streamflows and water surface profiles. The model was designed for use on basins less than approximately...
Use of Rayleigh Waves in Liquefaction Studies
The Spectral-Analysis-of-Surface-Waves method is a new seismic method for efficient determination of shear wave velocity in situ. Vertical impacts applied to the ground surface are used...
Seismic CPT to Measure In-Situ Shear Wave Velocity
A new test, called the seismic cone penetration test (SCPT) is described. A small rugged velocity seismometer has been incorporated into an electronic cone penetrometer. The combination...
Relationships between Shear Wave Velocity and Depth of Overburden
Relationships between in-situ shear wave velocity and depth of overburden have been derived for various Quaternary age soils encountered primarily in Southern California. The geotechnical...
Is There Grit in Your Sludge?
Getting the grit out of municipal sludge can lower the total cost of operating a wastewater plant. Grit escalates maintenance costs and abrasive-laden sludge is costly to dispose of. Because...
Hydraulic Profile Computation Using CADD
The data preparation can also be performed by directly recording onto a computer tape the aerial survey cross section ground points and the field survey work. A computer program can then...
Equilibrium Beach Profiles: Prediction of Coastal Erosion Due to Severe Storms
This paper describes a method that calculates coastal erosion due to severe storms. The equilibrium beach profile concept used in this study was developed by Swart. The agreement between...
Vanishing Beaches: Erosion Control & Public Policy
Currents, often remotely situated, divert the littoral supply which normally ensures a positive balance among factors preserving natural beach configurations. Artificial structures such...
Measurement and Use of Shear Wave Velocity for Evaluating Dynamic Soil Properties
Geotechnical engineers have recognized in the past decade that shear wave velocity is a basic soil property and have begun to use it to characterize sites for many uses. Most notable has...
A Two-Dimensional Numerical Model of Thermal Discharges in Coastal Regions
This paper describes a two-dimensional numerical model of thermal discharges in coastal regions. The model uses potential flow theory to calculate the ambient velocity field of the coastal...
Open Channel Flowrate Measurement Using Multipath Acoustic Flowmeters
Recent acoustic flowmeter developments have improved the applicability and accuracy of the multipath acoustic measurement technique. Accuracy, hardware cost and calibration cost can be...
Water Surface Profiles in Compound Channels
The paper explores the use of the proposed compound channel Froude number in problems of water surface profile computation. It can be used not only to determine critical depth and to identify...
Boundary Shear Stress in a Meandering Channel
Longitudinal and transverse velocity, bed shear, and water surface elevation were studied in a fixed-bed, meandering, laboratory channel with naturally varying, non-prismatic cross sectional...
Return to search