Plans for Characterization of the Potential Geologic Repository Site at Yucca Mountain, Nevada
Site investigations in the vicinity of the potential repository site at Yucca Mountain, Nevada, have occurred for many years. This is due to the proximity of the potential repository site...

Surface-Based Site Characterization Testing to Determine the Suitability of the Yucca Mountain Site for a Nuclear Waste Repository
The Yucca Mountain Site in Nevada is currently being evaluated by the U.S. Department of Energy to determine its suitability for the first U.S. high-level radioactive waste repository....

Assessment of Natural Resources in Repository Siting
One way to discourage people from intruding into a repository for high-level radioactive waste is to locate it at a place that is not valuable for mineral resources. Thus, the Nuclear...

Simulation Modeling of Subsurface Development
This paper discusses the use of simulation modeling in analyzing subsurface development activities and estimating associated costs at the Yucca Mountain candidate repository site. Described...

Prototype Testing for the Yucca Mountain Project
The U.S. Department of Energy, through its Yucca Mountain Project Office (YMPO), has been conducting prototype activities in welded and non-welded tuff. These activities are in preparation...

The International Stripa Project: Technology Transfer From Cooperation in Scientific and Technological Research on Nuclear Waste Disposal
The Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA) sponsors the International Stripa Project. The Stripa Project is open to participation...

The Status of the Site Characterization and Validation Program in Phase III of the OECD/NEA Stripa Project
In 1980, the International Stripa Project was organized under the aegis of the OECD Nuclear Energy Agency for the purpose of conducting research, at the Stripa mine in Sweden, related...

Concepts in Prototype Testing for In Situ Geomechanical Investigations at Yucca Mountain
Geomechanical investigations comprise a significant portion of the site characterization program to be conducted at Yucca Mountain, the site of a proposed repository for nuclear waste....

Tomographic Geophysics for Better Subsurface Geologic Information
Geologic skepticism among engineers owes much of its origin to common ambigueties in geologic interpretations and the innate artistic aspects of geology and its related diciplines. Geophysical...

The Application of Vertical Seismic Profiling and Cross-Hole Tomographic Imaging for Fracture Characterization at Yucca Mountain
In order to obtain the necessary characterization for the storage of nuclear waste, much higher resolution of the features likely to affect the transport of radionuclides will be required...

Reconnaissance ? ??C and ??8O Data from Trench 14, Busted Butte, and Drill Hole G-4, Yucca Mountain, Nevada Test Site
Trench 14 was excavated to investigate the extent of Quaternary movement on the Bow Ridge fault, a north-south structure on the east side of Yucca Mountain. The trench exposes calcite...

Yucca Mountain Project Public Interactions
The U.S. Department of Energy (DOE) is committed to keeping the citizens of Nevada informed about activities that relate to the high-level nuclear waste repository program. This paper...

Local Economic Impact Assessment of the Nevada Test Site: A Methodological Prelude to Socioeconomic Assessment of the Proposed Yucca Mountain High-Level Radioactive Waste Repository
The economic impact of the high level of nuclear repository can be approximated by studying the economic effects of the Nevada Test Site. Using the UNLV Nevada models, we estimated the...

Site Selection Criteria for Constructing an Independent Spent Fuel Storage Installation (ISFSI) at a Commercial Nuclear Power Plant
Commercial nuclear power plants in the U.S. are responsible for providing their own interim storage for excess spent fuel. A facility located onsite, acting as a buffer between in-pool...

Effect of Minor Actinide Removal From Fission Products Before Vitrification on the Radiological Impact of a High Level Waste Deep Repository
The topic of this work is to assess the effect of minor actinide (Cm, Am, Np) removal from fission products before vitrification on the radiological impact of a vitrified waste geological...

The Source Term for HLW Disposal in the European Communities' R&D Programme
During the last five years, the EC's research programme on radioactive waste has focused much of its investigation in the field of HLW management on the source term for geologic...

Assuring Quality Measurements of Environmental Radioactivity for a High Level Waste Repository
Federal agencies have ordered detailed quality assurance documentation in procedures used for measuring environmental radioactivity during the site characterization phase at the proposed...

Computed Distributions of Residual Shaft Drilling and Drift Construction Water in the Exploratory Facilities at Yucca Mountain, Nevada
The Yucca Mountain Project is studying the feasibility of constructing a high-level nuclear waste repository at Yucca Mountain in southwest Nevada. One activity of site characterization...

Hydrologic Characterization of Faults and Other Potentially Conductive Geologic Features in the Unsaturated Zone
The capability of characterizing near-vertical faults and other potentially highly conductive geologic features in the vicinity of a high-level-waste repository is of great importance...

Research for Final Disposal of Unreprocessed Spent Nuclear Fuel in Sweden
The second Swedish programme on research, development and demonstration in the nuclear radioactive waste management area was submitted by SKB to the Swedish National Board for Spent Nuclear...

 

 

 

 

Return to search