Development of a CRUD Particle Size Distribution and Its Effect on Cask Source Term and Containment Analyses
Spent pressurized-water reactor (PWR) and boiling-water reactor (BWR) fuel rods from three reactors were examined by hot cell periscope, energy dispersive x-ray analysis, and scanning...

Removal of Scale from Potable Hot Water Systems by Carbon Dioxide Injections
An innovative method for inplace scale removal has been developed and demonstrated. Injection of carbon dioxide gas into a piping system can lower the pH of the hot water and remove or...

Predicting Watermain Breakage Rates
Recent studies on water main breakage have shown significant spatial and temporal clustering in the breakage pattern. The methodology described in the paper provides the basis for a prediction...

Urban Drainage Pipe Systems: Failure Diagnosis and Rehabilitation Planning
A Task Committee on Failure Diagnosis and Rehabilitation of Urban Drainage Infrastructure has been organized by the Urban Water Resorces Committee of the Water Resourcs Planning and Management...

The New Generation of Pipeline Rehabilitation
The new advancements in pipelines reconstruction technologies now permit total sewer system rebuilding of collectors, drainlines, manholes, service laterals, and force mains without excavation....

Is There a Future for Vacuum Sewers?
Vacuum sewers collect and transport sanitary sewage using pressure difference rather than gravity as the primary motive force. Compared to conventional gravity sewers, they use smaller...

Technical Work on Flexible Pipe/Soil Interaction Overview?1990
Research in the laboratory and field have been ongoing for the past seventy years on flexible pipe/soil interaction. Virtually all of the early work was done on steel pipe. During the...

Flexible Pipe Design Revisited
An overwhelming soil factor in the Iowa formula and random deformations at installation affords soil a prominent role in flexible pipe; this, together with a maximal deflection rule make...

Concrete Pipe Trenchless Technology
Precast reinforced concrete pipe is the most commonly used pipe material for jacking operations. For over 90 years, concrete pipe techniques, procedures and applications established the...

Pipeline Design and Installation
The proceedings of the International Conference on Pipeline Design and Installation, held on March 25-27, 1990 in Las Vegas, Nevada, presents information on all aspects of pipeline design...

Sounding Out Buried Waste
Geophysical diffraction tomography (GDT) is a new remote sensing technique for quantitative high-resolution subsurface imaging. It is similar to optical holography where long wavelength...

Evaluating Spring Flow Trends at Pipe Spring National Monument and Vicinity, Arizona
A study conducted by the National Park Service Water Resources Division is resolving if ground water pumping is causing spring flow declines at Pipe Spring National Monument (PISP). Ground...

Scour in Non-Cohesive Beds at Culvert Outlets
An empirical relationship was developed to estimate the depth of scour in non-cohesive material at culvert outlets. The scour depth is expressed as a function of mean particle size of...

Application of the Ackers-White Procedure for Transport by Size Fractions and Testing in HEC-6
Modification of the Ackers-White method for the calculation of sediment transport by size fractions has led to a procedure which not only permits such calculations, but also increases...

Use of Linear Programming for Hydraulics Problems
Water is becoming a more and more precious commodity worldwide with each passing day. At the same time, the optimum and most productive solutions to water control and utilization are becoming...

Pump Selection Program and a Better User Interface
Numerous highly innovative computer solutions to engineering problems are of little use to the practicing engineer because these programs are not supported by adequate user interface....

The Equivalence of Path and Node Methods for Water Distribution Network Analysis
This paper deals with the equivalence between commonly employed methods, path and node adjustment methods, for analyzing water distribution networks. The basic equations for steady-state...

Advances in Pipeline Materials
Pipelines transport water, storm run-off, process wastes, petroleum, natural gas, slurries, solids, sewage, steam and other fluids either by gravity or under pressure. Pipelines are also...

Selection of Hole Size for Fluidization Pipes
Two-dimensional fluidization experiments are performed on fine and medium coarse quartz sands at depths of 25.4 and 42 cm. Four supply pipes are used with orifice diameters of 1.587 mm...

OTEC Sea Water Systems Technology Status
A workshop was conducted in April 1988 to provide an expert critique of the fabrication and deployment options for the seawater systems (all piping required to draw the seawater) of land-based...

 

 

 

 

Return to search