Correction Factor Method for Building Analysis Under Sequential Dead Loads
The effect of the sequential application of dead load due to the sequential nature of construction is an important factor to be considered in the multistory frame analysis. One of the...
Signal Analysis for Quantitative AE Testing
Quantitative acoustic emission (AE) techniques can be used to monitor crack growth and to deduce microfracture mechanisms in quasi-brittle materials. Multichannel data acquisition systems...
Software Applications for Monitoring Instrumentation Data
The initial program for reducing instrumentation data, used by the Geotechnical Branch of the Louisville District Corps of Engineers, was written in 1969. This program did not allow for...
Sensitivity Analyses for Total-System Performance Assessment
As a follow-on to Sandia's 1991 preliminary total-system performance assessment of the Yuc1ca Mountain site, this paper presents results of some sensitivity analyses that were done using...
Science Education Beyond the Classroom
The Yucca Mountain Site Characterization Project (YMP) sponsors a variety of classroom-oriented projects and activities for teachers who request them. Also available, though, are extra-curricular...
Testing Models of Flow and Transport in Unsaturated Porous Media
The design of an intermediate-scale flow and transport experiment in an unsaturated porous media is described. This experiment will be conducted a 3-m-diameter by 6-m-long caisson filled...
Preliminary Characterization of Materials for a Reactive Transport Model Validation Experiment
The geochemical properties of a porous sand and several tracers (Ni, Br, and Li) have been characterized for use in a caisson experiment designed to validate sorption models used in models...
Modelling Gas Migration Experiments in Repository
In response to concerns over the possibility of hydrogen gas generation within an underground repository for high-level radioactive waste, and its implications for repository safety, a...
Carbon Isotopic Data from Test Hole USW UZ-1, Yucca Mountain, Nevada
Rock-CO2-gas analyses in test hole USW UZ-1 at Yucca Mountain indicate that gas movement in the unsaturated zone is likely through a dry-fracture...
Carbon-14: Some Evidence of Migration and Experiments on Immobilisation
Carbon-14 that is produced in nuclear reactors by reactions on C, N and O is one of the most biologically dangerous nuclides that are subject to global dispersion (H-3, 85-Kr, 129-I)....
Discrete Feature Modelling at the Stripa Mine in Sweden: Significance for Hydrologic Modelling of Fractured Rock Masses
The third and final phase of the Stripa Project included a series of characterization efforts, predictions, and validations to determine the viability of discrete-fracture groundwater...
Modeling of Strongly Heat-Driven Flow Processes at a Potential High-Level Nuclear Waste Repository at Yucca Mountain, Nevada
Two complementary numerical models for analyzing high-level nuclear waste emplacement at Yucca Mountain have been developed. A vertical cross-sectional (X-Z) model permits a realistic...
An Assessment of Coupled Thermal-Hydrologic-Mechanical-Chemical Processes
A literature review was conducted to determine the state of knowledge available in the modeling of coupled thermal (T), hydrologic (H), mechanical (M), and chemical (C) processes relevant...
Findings of the Secretary of Energy Advisory Board Task Force on Radioactive Waste Management
Secretary of Energy James D. Watkins created the Task Force on Radioactive Waste Management in April 1991. He asked the group then to recommend measures the Department might take to strengthen...
Influence of Deterministic Geologic Trends on Spatial Variability of Hydrologic Properties in Volcanic Tuff
Hydrologic properties have been measured on outcrop samples taken from a detailed, two-dimensional grid covering a 1.4 km outcrop exposure of the 10-m thick nonwelded-to-welded, shardy...
Evaluating Soil Moisture and Hydraulic Conductivity in Semi-Arid Rangeland Soils
The United States Department of Energy's Office of Civilian Radioactive Waste Management (DOE-OCRWM) Fellowship Program supports various disciplines of academic research related to the...
Single-Hole in Situ Thermal Probe for Hydrothermal Characterization at Yucca Mountain
The REKA thermal probe method, which uses a single borehole to measure in situ rock thermophysical properties and provides for efficient and low-cost site characterization, is analyzed...
Determination of Water Content in Unsaturated Flow Experiments Using TDR and Capacitance
Electromagnetic techniques have been used for many years for the determination of moisture content in materials. We are adapting two of these techniques to the estimation of moisture in...
Characterizing the Hydrogeologic Framework of the Death Valley Region, Southern Nevada and California
Three-dimensional (3-D) hydrogeologic modeling of the complex geology of the Death Valley region requires the application of a number of Geoscientific Information System (GSIS) techniques....
A Comparison of Geostatistically-Based Inverse Techniques for Use in Performance Assessment Analyses at the WIPP Site?Results from Test Case No. 1
The groundwater flow pathway in the Culebra Dolomite aquifer at the Waste Isolation Pilot Plant (WIPP) has been identified as a potentially important pathway for radionuclide migration...
Return to search