ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Seismic Vulnerability Assessment of Seattle Water Department's Water System Facilities
The Seattle Water Department (SWD) service area and watersheds lie in seismic zone 3, in which there is potential for major earthquakes (Richter magnitude 7.5 or greater). The SWD system...

Seismic Analysis and Design of Buried Piping
Among the causes of damage to buried pipelines due to earthquakes, the one that is most complicated to analytically deal with and that is most credible at safety related sites such as...

Earthquake Response of Liquid-Filled Pipeline at Finite Depth Below Ground Surface
This paper deals with the problem of earthquake response analysis of pipelines, empty or fully filled with liquid and buried at a finite depth below the ground surface. Emphasis is placed...

Finite Element Analysis of Three-Way Joint of Buried Pipelines Under Earthquake Loads
A quasi-static finite element procedure for the stress analysis of three-way joint of buried pipelines under earthquake loads has been established by quasi-conforming thin circular cylindrical...

Spectral Shapes and Amplifications for the Loma Prieta Earthquake of October 17, 1989
The 1971 San Fernando earthquake provided engineers and seismologists with the largest number of strong motion accelerograms ever recorded for an earthquake at that time. Those records...

Liquefaction Hazard Analysis for Design of the Kern River Pipeline at the Muddy River Crossing, Southern Nevada
The 91.4-cm (36-in.) diameter Kern River natural gas transmission pipeline will cross the Muddy River in Moapa Valley, about 5 km west of Glendale, Nevada, in an area of relatively low...

Seismic Hazard Analysis of Buried Pipeline for Design
This paper concerns mainly the following three items on seismic hazard analysis of buried pipeline for design: (1) effects of pipeline length on risk, (2) effects of local site conditions...

Reliability of Highway Bridge Columns Under Earthquake Loading
Seismic design procedure for highway bridges normally specify that any inelastic action be confined to the columns. Concrete bridge columns are usually designed to resist an elastic force...

Seismic Behavior and Vulnerability of Pipelines
In this paper criteria and related features are described pertaining to the seismic design of pipelines and pipeline systems. The presentation begins by describing the past performance...

Seismic Design Criteria for Transportation Structures
Seismic criteria for the design of transportation stuctures have evolved slowly since their inception in the early 1940s. Although seismic design criteria are far more sophisticated than...

Applications of Strain and Deflection Monitoring Systems for Post-Earthquake Safety and Usability of Lifelines
The paper proposes and discusses a variety of strain and deflection monitoring devices and systems for post-earthquake safety evaluation of lifelines. There is clearly a need, both in...

Understanding the Earthquake Environment, Corporate Strategies
Corporations should understand the impact that earthquakes may have on their ability to function. Some earthquake related issues which face a corporation are: earthquake design levels...

Evaluation of Techniques for the Seismic Modeling of Elevated Freeway Bridges
Following the October 1989 Loma Prieta earthquake in Northern California, a number of seismic parametric studies were performed for both two-level elevated freeways and single-column bridge...

Stochastic Responses of Lifeline Systems Under Seismic Excitations
A wave superposition model is proposed to predict the field motion on the basis of the seismic records obtained from a strong motion array. By assuming the ground motion to be a homogeneous...

Seismic Analysis and Design of RC Lifelines
This paper describes the general approach for analyzing a soil-reinforced concrete lifeline system subjected to seismic loading, and the development and importance of transfer functions...

Elevated Water Tank Inelastic Seismic Analysis
In 1988, the Seattle Water Department hired CYGNA, a consulting firm, to assess the seismic reliability of their water system, since major earthquakes can occur in the area. Their study...

Simplified Uplift Analysis of Unanchored Cylindrical Tanks
Seismic tank damage has been reported in almost every major earthquake in the past, sometimes with serious environmental ramifications, thus raising concerns about the safety of these...

Effects of Cracking on Damping of Concrete Dams
A methodology is presented for dynamic analysis of concrete dams that considers the nonlinear stiffness and energy absorption effects of cracking. A cracking-consistent damping model is...

Simplified Numerical Analysis on Earthquake Response of Irregularly Bounded Surface Layer
Evaluation of seismic response of a soft surface layer is the essence in a design of a lifeline in this layer. For this purpose, a quasi-three dimensional ground model was developed by...

Application of Lateral Spread Hazard Definition Using Liquefaction Susceptibility Index to the Design of Buried Pipelines
Recent liquefaction hazard studies have made use of relationships developed to provide direct estimates of liquefaction displacements interms of liquefaction susceptibility index (LSI)....

 

 

 

 

Return to search