Solution to a Waterhammer Problem: A Case Study
Waterhammer is caused by a rapid change in the flow velocity of liquid in a pressurized pipeline. Therefore, the potential for waterhammer exists in almost every pressurized liquid piping...
Twisting in the Wind
Wind tunnel tests are being used increasingly to test the aerodynamic stability of bridges. Many designers think these tests should be used early in the conceptual design stage, rather...
An Improved Method to Predict Annual Transit Fare Revenues from Mid-Year Results
Effective short-term financial management of transit systems requires the same three general actions necessary to manage all service oriented industries: 1)monitoring of short term (usually...
A Knowledge-Based Approach to Improve Urban Transportation Decision-Making
This paper describes a microcomputer-based tool that has been developed to facilitate acquisition and improvement of skills in urban transportation decision-making, in an educational environment....
Wind Tunnel Model Studies of Buildings and Structures
This manual provides guidelines on wind tunnel model testing of buildings and structures. Included are procedures required to provide representative information on wind effects experienced...
Microcomputer Applications in Transportation II
This book contains over 80 papers associated with the North American Conference on Microcomputers in Transportation held in Boston, Mass., from June 29-July 1, 1987. The papers address...
Computing in Civil Engineering
This book contains papers submitted for presentation at the Fourth Annual Conference on Computing in Civil Engineering. General topics include computer graphs, computer aided design, computer...
Capacity Increase of Multi-Jet Pelton Turbines
The recent connection to the grid of large capacity thermal stations, to meet the increasing demand, has entailed an evolution in the type of services required from storage plants with...
A Stochastic-Conceptual Reservoir Inflow Forecasting Model
The development of a method to improve real-time forecasting of reservoir inflows for the purpose of minimizing water loss through spillage is presented. Streamflow forecasts are computed...
Turbine Efficiency Loss Associated with Draft Tube Aeration
Draft tube aeration is one method for improving the dissolved oxygen content of hydroelectric discharges. A simple analytical procedure is presented for estimating the loss in turbine...
Francis Turbine Surge Prediction and Prevention
Every Francis turbine has some range(s) of load where the flow in the draft tube is subject to fluctuations. Various types of surge during 'steady-state' operation...
Rim-Drive Turbine for Low Head Applications
A turbine design and testing program was undertaken with the objective of developing a standardized turbine/generator arrangement that would be well suited to the 10 to 30 foot head range....
Hydraulic Transients?Helms Pumped Storage Project
Pacific Gas and Electric Company's Helms Pumped Storage project is a large underground hydroelectric development which went into commercial operation in June 1984. Because...
Valuation of System Hydro Additions
The purpose of this paper is to examine the major factors and steps which affect the valuation process of adding hydro power plants to an integrated hydro-thermal generation system. Results...
Hydroturbine Intake and Penstock Geometry Design
This paper studies the intake design of one hydroturbine site and the penstock trifurcation design of another site. A hydroturbine site had been built and was in operation when vortexing...
The Design, Analysis and Manufacturing of Pickwick Landing Replacement Runners
This paper presents new computer automated techniques for the design, analysis and manufacture of Kaplan turbine blades. The inlet flow field was determined using the finite element program...
Open Flume Turbine Intake Geometry
An inexpensive physical hydraulic model was used to investigate the geometry of two different open flume turbine intakes. One intake utilized an inverted, fabricated pump bell type of...
Diffuser Performance for Draft Tube Applications
Available information on diffuser performance is summarized in relation to draft tube applications. This paper is particularly directed at the implications of basic research with these...
Hydraulic Machines Model Acceptance Tests
The article begins with a description of the modern test installations, giving the dimensions of the models most frequently used and the head heights. Attention is then given to the most...
An Overview of Hoover Dam Tunnel Spillway Damage
The Hoover Dam tunnel spillways have provided the Bureau of Reclamation hydraulic laboratories with new and continued opportunities for applied research. During the peak years of the Boulder...
Return to search