Polyhedric Surfaces
A new design for spillways is proposed. The basic idea is to substitute the traditional shape of the continuous vertical bends by polygonal plane surfaces. In this way it is possible to...
Applications of the Singular Point Method to Hydraulic Analysis of Spillways
A computer-oriented procedure is described to develop rating tables for side channel spillways. The procedure includes three sets of computations which have to be performed iteratively...
Hydraulic Design of Pamo Dam Spillway
The design of the emergency spillway for the San Diego County Water Authority's (SDCWA) proposed Pamo Dam is discussed. Pamo Dam is a 264-foot (80. 5 meter) high roller compacted...
Spline Interpolations for Water Hammer Analysis
The method of characteristics (MOC) with spline polynomials for interpolations was investigated for numerical water hammer analysis. The overall accuracy is significantly improved compared...
Numerical Modeling of Column Separation with Large Pressure Pulses
Liquid transients involving column separation occur in pipelines when the pressure drops to the vapor pressure of the liquid. The collapse of vapor cavities may result in short duration...
Computation of Supercritical Flow in Open Channels
The use of two explicit, shock-capturing, finite-difference schemes, Lax and MacCormack, for the solution of two-dimensional shallow-water equations in steady, supercritical flow is investigated....
Lower Mississippi River Salt Intrusion Modeling
A laterally averaged numerical model called LAEM has been employed for both a 40- and 55-ft channel. In addition, LAEM has been applied with an increased height of the natural river crossing...
Carichar?Mobile Bed Modeling with Graded Sediments
CARICHAR is a new system used for the computation of sediment transport. The coupled calculation of both water and graded sediments transport allows the simulation of sorting and armoring...
Modeling Sediment Yield Affected by In-Stream Sand Mining
Sediment yield refers to the amount of sediment having passed a given river section for a specified duration. While sediment will be stored in the borrow pit, it will also be depleted...
Verification of a Generalized Mudflow Model
This paper presents the results from recently completed studies verifying the accuracy and applicability of a generalized one-dimensional model for dynamic routing of mudflows. Numerical...
Hydraulic Availability Evaluation of Urban Water Distribution Systems
This paper presents a concept for evaluating urban water system reliability using an extended period hydraulic simulation model in conjunction with mechanical availability analysis. Reliability...
Optimal Design of Large Scale Water Distribution Systems
This paper presents a methodology for the design of least cost water distribution systems. The advantage of the formulation compared to the other techniques in the literature is that it...
GLVHT Model Verification using Field Data
The Generalized, Longitudinal-Vertical Hydrodynamic and Transport model (GLVHT) as developed for the U. S. Army Corps of Engineers Waterways Experiment Station and described in Buchak...
Nontidal Exchange Processes at the Chesapeake Bay Entrance
Magnitudes of gravitational and meteorologically-driven exchange at the entrance to the Chesapeake Bay are compared using current measurements, numerical model runs and subtidal volume...
Longitudinal Dispersion in Partially-Mixed Estuaries
The longitudinal dispersion in partially-mixed estuaries was formulated to consist of two terms. The first term accounts for the dispersion due to the vertical and transverse shear of...
Development of Scour Channel After Spillway Failure
In November 1985 parts of the spillway which controlled the water level in Lake Charleston failed during a moderate flood event. The spillway failure resulted in formation of a large 'sinkhole'...
Low Head Dam Safety Studied with Hydraulic Models
Use of physical models to study the hydraulic jump or submerged roller action created as water overflows low head dams provides an opportunity to develop design criteria for various structure...
The Development of Test Cases for Hydrodynamic and Transport Models
This paper reviews the test cases employed by several investigators in the development of two- and three-dimensional finite difference and finite element hydrodynamic and transport models....
Cellular-Automata for Hydrodynamic Modeling
A two-dimensional fluid continuum system can be modeled using a discrete field of particles that interact according to simple deterministic rules. The methodology is called Cellular Automata....
An Efficient, Accurate Technique for Navier-Stokes Solution
Solution of the Navier-Stokes equations for a Newtonian, incompressible fluid (such as water) requires both accuracy in the assuring conservation of mass and efficiency of convergence....
Return to search