Numerical Methods for Simulating Debris Blockage Failures and Mudflows
This paper presents the procedures and results from an investigation to evaluate the hydraulic characteristics of mudflow events resulting from hypothetical failures of a debris blockage...

Irrigation Delivery Design with Parameter and Objective Uncertainty
This paper investigates the effects of uncertainty in the design of hydraulic structures in an open-channel system for irrigation water delivery. Uncertainty due to ambiguity in the values...

The NPUSM (Narmada) Model for Modeling Canal Flows
The NPUSM computer program was developed for the analysis of unsteady flows in canals with various types of canal structures to evaluate the Narmada Canal system in Gujarat, India. The...

Field Fabrication of Reinforced Plastic Pipes
A new technology allows fabrication of reinforced plastic pipe in the field, or the lining of existing pipe. The plastic used can be selected to meet job and site requirements. The reinforcing...

Discharge Forecast of Underground Tunnel System
An underground tunnel system can be discribed with linear system theory and its mathematical model can be made up according to its recharge and discharge conditions. But, because of so...

Evaluation of the FASTCHEM Model for Predicting Leachate Attenuation at Fossil Power Plants
The Tennessee Valley Authority (TVA) has applied the model FASTCHEM to identify retardation mechanisms and predict solute transport at two fossil power plants. FASTCHEM (acronym for fly...

Application of Decision Analysis in Groundwater Remediation Design
The design of groundwater remediation systems involves selecting from a set of design alternatives under conditions of uncertainty. A risk-based decision analysis approach is presented...

Application of Tracer Tests in Groundwater Remediation Design
Recent advances in the area of field testing for the quantification of hydraulic conductivity have resulted in improved site characterization of aquifer hydraulics and greater reliability...

Hydraulic Aspects of Grade Control Structures
This paper describes the function of grade control structures. The primary purpose of a grade control structure is to maintain or establish a desired bed elevation in a channel. Basically...

Riprap Design Criteria for the ARS Low Drop Structure
The ARS low drop grade control structure has proven to be an effective means to stabilize incised channels in Mississippi. However, field inspections and laboratory testing have indicated...

New Lessons About the Hydraulic Performance of Highway Storm Sewer Inlets
Laboratory experiments were performed with highway storm water curb inlets to 1) reduce the oblique standing wave that extends into the highway from the downstream side of the inlet and...

Stepped Spillway Design for Flow Over Embankments
Many embankment dams have been identified as unable to pass their design flows without failure due to overtopping. The U.S. Bureau of Reclamation (Reclamation) is currently at the forefront...

Fluidization Pipe Hole Spacing
Two-dimensional fluidization experiments are performed on fine (d50 = 0.15 mm) and medium coarse (d50 = 0.45...

Design of Groins on the Middle Rio Grande
The Albuquerque Projects Office of the Bureau of Reclamation wanted to use groins in place of revetments at two sites on the Rio Grande. The Bureau of Reclamation has limited experience...

Hydraulic Features of Flexible Curtains Used for Selective Withdrawal
Flexible curtain barriers are being investigated as a way to modify power penstock intakes to achieve selective withdrawal. The curtain barrier controls the elevation from which water...

Bridge Scour Vulnerability Assessment
Although the failure of the New York Throughway bridge over Schoharie Creek in 1987 has focused national attention on scour related failures, other failures reinforce the need for implementing...

The Design of Scour-Safe Bridges
Two new highway systems, the East Papago and the Pima freeways, are currently under design and construction within the Phoenix, Arizona, metropolitan area. Both of these highways will...

Appropriate Technology in Infrastructure Development and Management
Infrastructure management principles apply to appropriate technologies used for hydraulic structures. However, some of the principles are more culturally sensitive than others, mainly...

Education, Research and Training for Appropriate Technology
Much has been written about appropriate technology (AT) and how to accomplish it. This paper adds to that literature with specific ideas for education, training and research programs and...

The Role of Computational Fluid Dynamics in Hydroturbine Analysis
Prospects of developing comprehensive methods of computational fluid dynamics for the analysis and design of new generation of hydroturbines are considered. Unique requirements for this...

 

 

 

 

Return to search