Reconstruction of Concentration Boundary Condition for Unsteady Pesticide Transport Modeling
A one-dimensional unsteady contaminant transport model which used an unsteady hydraulic field was used to model pesticides (metolachlor, metribuzin) in the Iowa River/Coralville Reservoir....

GIS Application for Floodplain Analysis and Mapping
Michael Baker Jr., Inc. (Baker) is using Geographic Information Systems (GIS) technology and fundamental three-dimensional modeling techniques to automate the floodplain analysis and mapping...

Pipe Utility Evaluations With the Aid of GIS
Geographical Information Systems (GIS) are starting to be used on a day to day basis to solve community problems and optimize the use of their valuable resources. One engineering application...

Estimation of Field Site Flow Parameters
The paper reports on the use of Kriging to obtain estimates of hydraulic conductivity underneath a rapid infiltration site. The parameters obtained were used in a two-dimensional groundwater...

An Attempt of an Aquifer Model with Lack of Data
The University of the Americas in Cholula, Puebla, Mexico withdraws water from an unconfined aquifer. Also the city of Cholula and the city of Puebla withdraw water too. A model aquifer...

Movement of Colloids Under Hydraulic Gradients
A model was developed for analyzing the movement of colloidal clay particles in laboratory soil columns. The physical mechanisms of detachment of particles from the soil matrix, their...

Probable Maximum Flood Estimation for New and Existing Dams
Although various attempts have been made to streamline the procedures to determine PMF hydrographs for the design of new and rehabilitation of existing dams, there still remains a great...

HEC River Analysis System (HEC-RAS)
The Hydrologic Engineering Center (HEC) is developing next generation software for one-dimensional river hydraulics. The HEC-RAS River Analysis System (HEC, 1994) is intended to be the...

Modeling of Maximum Velocity in Open-Channel Flow
A great deal of information about an open channel flow is contained in the maximum velocity, which, along with the entropy parameter, can determine the mean velocity. Therefore, the maximum...

Hydraulic Design of Spillway Plunge Pool Linings
The design of plunge pools for high head spillways with flip bucket terminal structures often requires a detailed examination of the stability of the resulting scour hole in the river...

Revised Hydraulic Design of the Rio Hondo Flood Control Channel
The US Army Engineer District, Los Angeles has completed a major review study of the Los Angeles County Drainage Area (US Army, 1992) and has determined that the existing flood control...

Estimation of Spillway Free Jet Trajectory Lengths
The design of high head spillways with flip bucket terminal structures must include analysis of the length of the free jet issuing from the spillway. Prototype jet trajectory lengths are...

Using the Weir Back as an Energy Dissipator
The effect of weir back in energy dissipation is investigated experimentally and theoretically. The study includes four different shapes of weir back. The boundary friction force and the...

Design Considerations for Use of Wedge Wire Screens at Surface Water Intake Structures
This paper provides the suggested guidelines for design, construction, operation and maintenance of wedge-shaped wire cylindrical screens used for aquatic biota and trash and debris screening...

An Improved Design of Fishways Under High Variation of Headwater
For the purpose of mitigating environmental impact, it is necessary to build fish passing facilities for fish migration when a dam is constructed on a river. But when the headwater variation...

West Columbus, OH LPP Gate Closure Analysis - A Study of the Requirements for Multiple Closures
Providing flood protection by levees and/or floodwalls often requires the use of temporary closures, in lieu of the more expensive relocation of highways and railroads, in order to maintain...

What is Computational Hydraulics?
Computational hydraulics deals with methods and techniques for the numerical simulation of water flows in natural or man-made systems with the aid of computers. Flow and transport modeling...

Improved Hydraulic Features of the HEC River Analysis (HEC-RAS)
The Hydrologic Engineering Center (HEC) is in the process of developing a Next Generation (NexGen) of hydrologic engineering software. The goal in the area of river hydraulics is to develop...

MAC3D: Multiblock Numerical Model for Hydraulic Applications
The MAC3D computer code is a three-dimensional numerical model for incompressible flow. To enhance geometric flexibility, it uses multiblock grids, which are composite structured grids...

Numerical Simulation of One Dimensional Transcritical Flow
The term transcritical flow describes the existence of both subcritical and supercritical flow simultaneously within the computational domain. Transcritical flow situations are encountered...

 

 

 

 

Return to search