The Kinematic Design of a Robotic Large Space Structure Construction Service
Researchers at the University of Maryland's Robotics Research Lab are applying a kinematic rapid proto-typing methodology to the development of a commercial robotics service for the construction...
Bechtel Automated Lift Planning System
This paper describes the Automated Lift Planning System (ALPS) software developed by Bechtel Corporation. The software was developed to assist the construction engineer with planning and...
On the Dynamics and Control of Flexible Orbiting Systems: An Approach with Application
A relatively general formulation for studying the dynamics and control of an arbitrary spacecraft, with interconnected flexible, deployable and articulating structural members, is reviewed...
Improving Dynamic Finite Element Models Using Test Data
A structural optimization based method was developed to improve the finite element model to achieve good agreement with the test results. The modal displacements at critical locations...
Dynamic Analysis of a High Speed Transport Model by Using a Piecewise Continuous Timoshenko Beam Model
Conventional treatment of structural dynamic analysis and control is based on the finite element structural model. But such a treatment uses a very large number of elements which is usually...
Braced Double Skinned Structure in Lunar Application
A parametric study is designed to evaluate a proposed Braced Double Skinned roof structure utilizing extrapolated theoretical solutions i.e. Navier's solution and Levy's solution. A Finite...
Comparison of Donnell and Higher Order Nonlinear Models for Dynamically Loaded Composite Plates and Shells
The dynamic buckling behavior of composite cylindrical shells subjected to a transverse point load is considered. The behavior of undamped cylindrical shells of varying radii is analyzed...
Dynamics of Laminated Plates with Layer Waviness
Composite structures usually exhibit a high strength-to-weight ratio as compared to traditional structural materials. This makes them attractive solutions in many aerospace applications....
Thermal Response in Antenna Under Laser Irradiation
This investigation focuses on the thermal response of two objects under medium-intensity continuous-wave (CW) laser irradiation: (1) a homogeneous slab and (2) a complex electronic component,...
Damage Tolerance of Thin Composite Reinforced Membrane Structures
Structural performance of fiber reinforced flexible composite membranes, designed as pressurized shelters for space exploration, is investigated via computational simulation. An integrated...
Convergence Rates of the Method of Successive Elastic Solutions in Thermoplastic Problems of a Layered Concentric Cylinder
This paper examines convergence rates of the method of successive elastic solutions, proposed by Mendelson, in determining the thermoplastic response of an arbitrarily layered concentric...
Optical Scatter From a Space Craft Mirror Due to Microscopic Impacts
This article addresses the issue of how micrometeoroid and man made debris in the space environment can adversely change the optical resolution of a mirror. The study used an algorithm...
Interactions Between the Space Station Freedom Attitude Control System and Space Shuttle Remote Manipulator Controller During On-Orbit Assembly Operations
This paper presents the results of dynamics and control interaction analyses involving the Space Shuttle Orbiter, the Shuttle Remote Manipulator System (SRMS), and the Space Station Freedom...
The Effect of Mobile Transporter Motion on the Space Station Attitude Control System
The effect of Mobile Transport (MT) motion on Space Station stability and the performance of the Attitude Control System (ACS) using Control Momentum Gyros (CMGs) is assessed. Analysis...
Space Station Microgravity Analysis and Assessment
The space station will be a platform for microgravity research. For superior microgravity science, the experiment locations must experience very little acceleration in the quasi-steady...
A Space Station Simulation: EXEMSI '92 A Study on Confinement and Isolation of a Mixed Crew of Four during 60 Days
Manned spaceflight is entering a new era. The next period will be characterized by long duration stays in space and heterogenous crews. EXEMSI '92 was an attempt to study the human-related...
Modeling of Interaction of Small Particulates in Earth Orbit
The hazards posed by small debris is an area of increasing concern for all space systems. Depending on the size and relative encounter velocity of small particulates, there are a variety...
Integrated Spacecraft Environments Model (ISEM)
Capabilities of the ISEM code are presented that can aid in the understanding of the complex interactions between a space system and the ambient environment. The development of ISEM has...
Energy Analysis of High Temperature Lunar Manufacturing Processes
This paper presents an energy analysis methodology to optimize the power system requirements for high temperature manufacturing processes on the moon. Power requirement and power system's...
The Levitation of Lunar Dust Via Electrostatic Forces
Apollo and Surveyor photographs revealed an unexpected lunar phenomenon that has come to be known as the 'horizon glow'. During lunar sunrise and sunset, a line of light was visible above...
Return to search