Composite Applications in Highway Bridges
This report presents a summary of a four year research effort titled, 'Transfer of Composite Technology to Design and Construction of Bridges'. Extensive analytical...
Laboratory Fatigue Investigation of a GRP Bridge
A fatigue study of a 4.9 m glass-reinforced plastic bridge indicated a resistance to 1.6 million cycles of load without extensive damage to joints or elements. Viscoelastic creep occurred...
Environmental Considerations in the Design of Asphalt Concrete Paving Mixtures
The design of asphalt concrete mixtures is largely based on two empirical mixture design methods. These are 'Marshall' and 'Hveem',...
Size Effect in Concrete Structures and Influence of Loading Rate
The size effect law models the influence of the dimensions of the structure or specimen on the failure stress. This model can be used to quantify the brittleness of failure, and determine...
Flexural Strength of Externally Reinforced Concrete Beams
Results from tests of one rectangular and one T-beam are reported. The beams were strengthened by epoxy-bonding a 1/4 in. (6 mm) thick Glass Fiber Reinforced Plastic plate along the tension...
Uni- and Bi-Axial Compressive Fatigue of Fiber Concrete
Fatigue behavior of fiber reinforced concrete is studied under uniaxial and biaxial loadings. The S-N curves and the cyclic deformations of fiber concrete are compared to those of plain...
Application of Waterjet Cutting for Pothole Repair
A study was conducted to determine the feasibility of utilizing high pressure waterjet cutting technology as an infrastructure maintenance tool. The influence of waterjet cutting parameters,...
Inelastic Stability of Thin Walled Metal Tubes Under Cyclic Loading Conditions
This paper is concerned with an experimental investigation on the inelastic stability behavior of thin-walled tubular specimens of steel, aluminum and stainless steel, under cyclic loading...
Behavior and Strength of Telescopic Steel Shores
To study the load distribution between concrete floors and shores during construction, the non-linear axial load-shortening behavior of a single post shore must be modeled properly. In...
Stresses in Concrete Armor Units
This book is derived from a Seminar at the Waterways Experiment Station, Coastal Engineering Research Center, Vicksburg, Mississippi held on November 7-8, 1989. It presents a state-of-the-art...
Selected Earthquake Engineering Papers of George W. Housner
Sponsored by the Structural Division of ASCE. This volume collects key papers on earthquake engineering by George W. Housner, who more than any other...
Design and Performance of Earth Retaining Structures
The proceedings of the 1990 Specialty Conference on Design and Performance of Earth Retaining Structures was held in Ithaca, New York from June 18-21, 1990. It presents a total of 50 papers...
Untangling A Can of Worms
Increasing traffic volumes combined with rush-hour delays and commuter complaints have spurred New York State DOT to improve the capacity of a major interchange near Rochester. The interchange,...
Gateways to Understanding
Automating engineering design processes are crucial to the growth and the very survival of professional services providers. The need to enhance their competitiveness and the value provided...
Bibliography of Steel Columns
This book, which was prepared by the Committee on Compression Members of the Structural Division of the American Society of Civil Engineers, attempts to provide a complete bibliography...
Commentary on Building Code Requirements for Masonry Structures (ACI 530-88/ ASCE 5-88) and Commentary on Specifications for Masonry Structures (ACI 530.1-88/ ASCE 6-88)
Facelift For an Interchange
The authors describe a $250 million reconstruction project on a three-level interchange linking I-84 and I-91 in Hartford, Conn., which is the largest rehabilitation project in the state's...
Seismic Surgery
The authors describe the installation of seismic isolators in the columns of an eight-story concrete building in Seal Beach, Calif., which serves as Information Systems Center for Rockwell...
Seattle Swing
The swing bridge has long been out of favor in the U.S. because of the navigational hazard presented by mid-channel pivot piers. A consortium of engineers is updating the design to a state-of-the-art...
Bridges on Screen
Computer software can help engineers produce designs for more economical, constructable bridges in less time than conventional methods. Software is being put to work in bridge design departments...
Return to search