Irrigation Intervention Analysis of Drainage SAR
G.E.P. Box-G.M. Jenkins time series analysis, with irrigation applications as an intervention function, was used to study temporal and spatial variabilities of sodium adsorption ratios...
Random Characteristics of Sediment-Laden Flows and the Techniques of Effective Sediment Exclusion on Dujiangyan Irrigation Project in China
The irrigation system is over 2,200 years old and discharges water at a rate of 340-740 m3/s from the Minjiang River. The average slope of the river...
Verification of an Agricultural Land Drainage Model
An agricultural land drainage simulation model was tested under field conditions. The model was found to have several errors. Some of these errors were corrected and the model was tested...
Modeling Irrigation and Nitrogen Management
Irrigation increases the potential for nitrate accumulation in the groundwater in two ways. It increases the water content in the root zone creating a greater potential for leaching. Two...
Visual Estimates of Flume and Weir Operating Conditions
Laboratory studies were conducted on a rectangular broad-crested weir to determine the effects of entrance and exit conditions on the prediction of discharge and required energy loss....
Crop Irrigation Requirement Model for Utah
Crop irrigation requirements vary greatly across Utah's wide range of climatic conditions. About 40 electronic weather stations have been established in areas representing...
Power Formula for Open-Channel Flow Resistance
This paper evaluates various power formulas for flow resistance in open channels. Unlike the logarithmic resistance equation that can be theoretically derived either from Prandtl's...
Closed-Loop Control for Hydraulic Laboratory Operation
The implementation of Closed-Loop Feedback Control in the Bureau of Reclamation's Hydraulic Laboratory flow delivery system has provided an important new modeling tool for...
Applications of GSTARS Model
GSTARS is a Generalized Stream Tube model for Alluvial River Simulation. Depending on an engineer's need, GSTARS can be used as a fixed boundary as well as a movable boundary...
Two-Dimensional Numerical Modeling for Long-Term Sedimentation
Numerical modeling of long-term sedimentation processes in multi-dimensional models is computationally intensive and thus often uneconomical. A statistical superposition technique has...
Mathematical Modeling of Compound Channel with High Sediment Concentration
The mathematical model for erodible channels, FLUVIAL-12, has been extended to simulate the fluvial processes in the lower reach of the Yellow River in China. Fluvial processes in the...
Geotechnical and Hydraulic Stability Numbers for Channel Rehabilitation: Part I, the Approach
A model of incised channel evolution was developed to integrate the geotechnical and hydraulic factors that are involved in channel rehabilitation. Bank stability is attained when the...
Computations of High-Velocity Flows on Alluvial Fans
The results of numerical models of supercritical flows on alluvial fans demonstrate the strong effect fan topography has on flow velocity and depth. Particularly important are transverse...
Features of Flow in Slurry-Thickening Ponds
The study reported was undertaken to investigate the physical processes which come into play in settling-pond slurry thickeners and causes their behavior to deviate from those included...
Microstructure of Cohesive Sediment Suspensions
In a shear flow field suspended fine sediments under relatively low concentrations and stable stratification conditions develop a step-wise profile. This is due to internal wave instability...
Analytical and Numerical Modeling at High Sediment Concentrations
Methods for classifying sediment-water mixtures according to material concentration and rheologic properties are discussed. Results from laboratory and field measurements show that bed...
Three-Dimensional Modeling of Cohesive Sediments and Pollutants in Surface Waters
Particulate and dissolved pollutant transport rates are predicted using a pollutant transport modeling system. The latter is a finite element model capable of simulating three-dimensional...
Probabilistic Approach to Maintenance Scheduling
Maintenance has the purpose of prolonging the working life of equipment and of sustaining expected levels of performance and reliability. If equipment deterioration is construed as a probabilistic...
Overview o New England Coastal Flood Study Methodology
This paper presents an overview of the development of methologies used to determine the probabilistic flood levels for New England coastal flood insurance studies. The Federal Insurance...
Hydraulic Study for the Construction of Artificial Islands in Peoria Lake, Illinois
Long-term sediment accumulation in the lake reduced the average depth of the lake from 8 feet in 1903 to 2.6 feet in 1985, which resulted in the deterioration of aquatic habitats and recreational...
Return to search