Concrete Beam Testing with Optical Fiber Sensors
The use of an embedded multimode optical fiber to monitor curing and load-to-failure testing of a reinforced concrete beam has been investigated. The embedding process used to network...
Condition Monitoring of Structures Using Transient Response
Condition monitoring of structures by measuring transient response and tracking the derived modal parameters has been applied with success in three laboratory studies. Where modal parameters...
Simulated Field Trials of Non-Destructive Concrete Test Methods for Highway Structures
The data presented results from a two year Strategic Highway Research Program investigation into suitable NDT methods for determining the early age, and residual strengths of highway structures....
Review of NPP Concrete Degradation Factors and Assessment Methods
Degradation of concrete in nuclear power plant (NPP) structures can be an age-related phenomena. Several research programs have been initiated by the U.S. Nuclear Regulatory Commission...
Pullout Testing of High-Strength Concrete Members
An experimental investigation of a high-strength concrete mixture was undertaken to measure and evaluate pullout and compressive strength properties. Two columns, a slab, and cylindrical...
Collective Excellence
Building Effective Teams
A New Era In Transportation
Its passage into law was about as smooth as a rush-hour traffic jam, but the surprising thing about the new Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) is that it...
Adaptive and Parallel Methods for Nonlinear Solid Mechanics
The solution of nonlinear problems, which are of importance to industry and in scientific computations, requires increasing degrees of resolution. This high degree of resolution can be...
Probabilistic Mechanics in Civil Engineering
This paper describes the background, purpose and activities associated with the ASCE Engineering Mechanics Division and its technical committees. This includes research in probabilistic,...
On the Influence of Seismically Induced Residual Forces on Bridge Abutment Design
The seismic design of bridge abutments depend on the anticipated movement of the abutment during the design earthquake. For seat-type abutments in which the backfill resistance can be...
Wind Cross-Spectrum Effects on Long-Span Bridges
This paper discusses current analysis for long span bridge response based on wind components. The authors summarize the development of techniques which take such components into account,...
Analytical Studies on the Seismic Response of Lead Rubber Base Isolated Bridges
Highlights of a study related to the response of base isolated bridges are presented. Four different analytical models are developed and used to evaluate the response of base isolated...
Nonlinear Shoaling and Impact of Waves on Coastal Structures
A two-dimensional fully nonlinear potential flow model is used to calculate shoaling of solitary and enoidal waves over a sloping bottom and interaction with submerged or emerged coastal...
Aspects of Parallel Processing in Reservoir Simulation
Vectorization techniques have proved to be extremely effective for large-scale reservoir simulations. Parallel capabilities hold even greater potential for these enormous problems. Domain...
On the Role of Experimental Mechanics in Assessing the Performance of Concrete
The role of experimental mechanics in material characterization, design, construction, performance evaluation, repair, rehabilitation and finally destruction of concrete structures is...
Two Basic Concepts in Offshore Engineering
Two concepts are developed which lead to an improved understanding of the characteristics of the wave forces that act on deep-water, jacket-type offshore structures. The first concept...
3D Frequency Domain Analysis of Offshore Structures
This paper reports the application of three-dimensional (3D) frequency domain computational tools to the dynamic analysis of offshore structure systems. Previous applications of 3D frequency...
Responses of Bilinear and Impacting Systems Subjected to Regular Waves
The dynamic responses of bilinear and impacting oscillators subjected to harmonic loadings are investigated. Differing from previous studies in which bifurcation diagrams were developed...
Cylindrical Shell Redesign by Large Admissible Perturbations
Redesign (or inverse design) is the problem of defining an objective structural State S2 from its specifications and the known baseline State S1. The large admissible perturbations approach...
Wavelet Transform Analysis of Several Transient or Nonstationary Phenomena in Engineering Mechanics
Several examples of the use of a wavelet transform in the analysis of transient events in mechanical systems are provided. The transform has the advantage over other transient analysis...
Return to search