Turbines and Pump Turbines for Ultra High Heads
The paper describes the turbine development in Norway as background for high head turbine technology and shows a typical Norwegian high head Francis as an example. High head reversible...
Description and Evaluation of Program: CARIMA
The CARIMA code simulates unsteady free-surface flow in simple or multiply connected systems of rivers or canals. The simulation uses the Preissmann implicit finite-difference method for...
The Ala Wai Canal?From Wetlands to World-Famous Waikiki
The Ala Wai Canal, a man-made tidal estuary on the island of Oahu, Hawaii, is located about a half mile (0.8 km) landward of Waikiki beach and is two miles (3.2 km) long. As Hawaii's...
Field Application of Transient and Steady-State Canal Models in Thailand
A transient (unsteady) flow model for simulating the hydraulics in irrigation canal networks was developed and tested in Thailand. A steady-state hydraulic model was subsequently developed...
Numerical Methods for Simulating Debris Blockage Failures and Mudflows
This paper presents the procedures and results from an investigation to evaluate the hydraulic characteristics of mudflow events resulting from hypothetical failures of a debris blockage...
Irrigation Delivery Design with Parameter and Objective Uncertainty
This paper investigates the effects of uncertainty in the design of hydraulic structures in an open-channel system for irrigation water delivery. Uncertainty due to ambiguity in the values...
The NPUSM (Narmada) Model for Modeling Canal Flows
The NPUSM computer program was developed for the analysis of unsteady flows in canals with various types of canal structures to evaluate the Narmada Canal system in Gujarat, India. The...
Discharge Forecast of Underground Tunnel System
An underground tunnel system can be discribed with linear system theory and its mathematical model can be made up according to its recharge and discharge conditions. But, because of so...
Evaluation of the FASTCHEM Model for Predicting Leachate Attenuation at Fossil Power Plants
The Tennessee Valley Authority (TVA) has applied the model FASTCHEM to identify retardation mechanisms and predict solute transport at two fossil power plants. FASTCHEM (acronym for fly...
Hydraulic Aspects of Grade Control Structures
This paper describes the function of grade control structures. The primary purpose of a grade control structure is to maintain or establish a desired bed elevation in a channel. Basically...
Riprap Design Criteria for the ARS Low Drop Structure
The ARS low drop grade control structure has proven to be an effective means to stabilize incised channels in Mississippi. However, field inspections and laboratory testing have indicated...
Design of Groins on the Middle Rio Grande
The Albuquerque Projects Office of the Bureau of Reclamation wanted to use groins in place of revetments at two sites on the Rio Grande. The Bureau of Reclamation has limited experience...
Hydraulic Features of Flexible Curtains Used for Selective Withdrawal
Flexible curtain barriers are being investigated as a way to modify power penstock intakes to achieve selective withdrawal. The curtain barrier controls the elevation from which water...
Modeling of Wetland Hydrodynamics and Transport in Coastal Louisiana
Modeling of hydraulics and transport of large wetland systems poses critical decisions between resolution of the complex geometry of a wetland and the testing required to meet study goals....
Hydrodynamic Modeling of Bolsa Chica, California, Proposed Wetland Enhancements
The California State Lands Commission (SLC) requested US Army Engineer Waterways Experiment Station (WES), Coastal Engineering Research Center (CERC), to conduct engineering studies for...
Finite Element Modeling of Flow in Wetlands
Requirements for developing a mathematical model of unsteady flow in wetlands are suggested. An equivalent continuum approximation is appropriate to avoid problems of describing the turbulence...
Appropriate Technology in Infrastructure Development and Management
Infrastructure management principles apply to appropriate technologies used for hydraulic structures. However, some of the principles are more culturally sensitive than others, mainly...
Education, Research and Training for Appropriate Technology
Much has been written about appropriate technology (AT) and how to accomplish it. This paper adds to that literature with specific ideas for education, training and research programs and...
Design of High Capacity Spillways for Ritschard Dam, Colorado
A hydraulic model investigation was conducted by the Bureau of Reclamation to assist in designing the hydraulic structures associated with Ritschard Dam. Ritschard Dam will have a labyrinth...
A Modular Visual Interface for Computational Fluids Forecasting
A forecasting system is under development for predicting the three-dimensional physical features (e.g. velocity, temperature etc.) of large water bodies. Visualization and interface development...
Return to search