Composites for Offshore Applications: A Multidisciplinary Education Program for the Marine Industry
Composites are increasingly being considered for offshore and other marine structural applications. Polymeric matrix composites reinforced with glass, carbon, and aramids offer substantial...
Use of X-Ray Computed Tomography in the Study of Marine Sediments
X-ray computed tomography (CT scanning) is primarily a medical imaging technique. When applied to marine sediments, it responds predominately to the spatial density distribution within...
Internationalization of Engineering Professions
The most salient features impacting the development of our deepwater frontier areas are considered. The areas of higher potential for deepwater reserves are identified. The integrated...
Old Problems and New Challenges in Marine Geotechnical Engineering
The discipline of marine geotechnical engineering originated nearly five decades ago, primarily as a result of the offshore oil and gas industry. As this industry moved into deeper waters,...
Utilization of Waste Materials in Civil Engineering Construction
Industrial growth has increased the volume of wastes generated from energy production, mining, industrial processes and civil works. For economic and related reasons, the use of waste...
Wastewater under Home Plate
A short, highly sloped piping system and peak flows at the start and end of the day were causing the wastewater treatment plant in Daly City, Calif., to frequently exceed its permit for...
Smart Structures
Detecting cracks in concrete before they become visible could help prevent structural collapse of buildings and other civil works, say professors at three schools of engineering. The University...
Measured to the Max
Engineers looking to model the behavior of a structure under seismic conditions often ignore the best source of data available: the building itself. Full-scale measurements of vibrations...
Instrumenting the `Y'
Segmental bridges are still relatively new to the U.S. and questions persist about their design and behavior. To expand the knowledge base, a number of laboratory and field studies have...
Tensile Terminal
Few can miss a fabric roof that covers a 1.45 million sq ft area. The one covering the Denver International Airport's Landside Terminal complex (reportedly the nation's...
Seismic Assessment of Tailings Dams
A significant portion of the operating and closed large dams in North America are tailings dams used to impound wastes from mining operations. Often these dams were built by mine personnel...
Put to the Test
In the construction industry, the concept of life-cycle cost applies not only to the infrastructure itself, but to the materials that go in to building that infrastructure. To improve...
Settling Down Easy
In order to more fully participate in the international and Asian Pacific aviation network, it was decided to establish a highly efficient 24-hour a day operation at the New Kansai International...
Mining for Building Expansion
Engineers adapted mining techniques to tunnel under a vibration sensitive manufacturing operation to create new working space below. IBM workers needed more working space at their Vermont...
Civil Engineering in the Oceans V
This proceedings is a collection of technical papers presented at Civil Engineering in the Oceans V (CEO V) specialty conference held at College Station, Texas on November 2-5, 1992. Initiated...
Pressure Pipeline Design for Water and Wastewater
This committee report,
Structures Congress '92
Compact Papers
These Congresses provide a forum for the practicing engineers, researchers and educators. The involvement of numerous ASCE Divisions has helped to create a program that will appeal to...
Cables and Anchorages
The following types of cables are generally used in cable stayed bridges: Parallel bars; Parallel seven wire strands; Parallel or semi-parallel wire cables; Locked coil strands and ropes;...
Stability of Cable-Stayed Brides
This chapter deals only with stability under static loadings. For aerodynamic stabilities and stability of structure under seismic loading, see the appropriate chapters. Both the towers...
Rethinking the Competitive Bid
Concern that the U.S. construction industry is losing its competitive edge is nothing new. Ironically, the problem is not so much rooted in foreign technical expertise as it is in our...
Return to search