Certifying the TN-BRP and TN-REG Transportable Storage Demonstration Casks
The U.S. Department of Energy (DOE) has obtained U.S. Nuclear Regulatory Commission (NRC) certification to transport two transportable storage casks for a demonstration project. Because...
Development of the GA-4 and GA-9 Legal Weight Truck Spent Fuel Shipping Casks
General Atomics (GA) is developing two legal-weight-truck spent-fuel shipping casks for transporting commercial reactor spent fuel. The GA-4 pressurized-water-reactor (PWR) and the GA-9...
High-Capacity, High-Strength Trailer Designs for the GA-4/GA-9 Casks
General Atomics (GA) is developing final designs for two dedicated legal-weight trailers to transport the GA-4 and GA-9 Spent-Fuel Casks. The basic designs for these high-capacity, high-strength...
Multiple Event Considerations for Postclosure Seismic Hazard Evaluations at Yucca Mountain, Nevada
Postclosure waste canister design requirements suggest the values used for seismic design have less than a 10% chance of being exceeded in a 1,000 year postclosure period. Considerably...
Design Control Process Requirements for Geologic Repository Operations Area Design
This paper outlines U.S. Nuclear Regulatory Commission's (NRC's) key regulations applicable to U.S. Department of Energy's (DOE's) design...
Design Control Overview fot the Yucca Mountain Site Characterization Project Exploratory Shaft Facility
This paper presents an overview of the design control process used for the Exploratory Shaft Facility (ESF) at Yucca Mountain. Design and design control is a complex, often iterative,...
Design Considerations for the Yucca Mountain Project Site Characterization
The Site Characterization Facilities (SCF) to be located in volcanic tuff at Yucca Mountain is a challenge to manage, design, and construct. This challenge is a result of a number of factors....
Interpretation and Modelling Process of Bedrock Structures for Site Evaluation in Finland
The repository site for the final disposal of spent nuclear fuel in Finland will be selected by the end of the year 2000. Preliminary site investigations have been made in five areas since...
Design and Operating Criteria of the French Deep Repository for High Level Radioactive Waste
The design and operating criteria of the French geologic repository for high level radioactive waste (HLW) were selected for their contribution to operational and long-term safety, as...
Conceptual Design Study of Geological Disposal System of High-Level Waste
Conceptual design study of geological disposal system for HLW was carried out taking into account geological environment in Japan, in order to provide disposal concepts for integrated...
An Approach to Evaluate the Sufficiency of Highway Bridges for Nuclear Spent Fuel Transportation
The transportation of radioactive spent fuel can have a significant impact on bridge structures located on designated routes. Due to the critical nature of the cargo and because of the...
Industry Experience and Programs that Benefit the Monitored Retrievable Storage (MRS) Facility Design
The design objectives and criteria for an MRS must be responsive to the needs and concerns of the public and the industry. It is shown here that to the maximum extent, existing industry...
Disposal of Vitrified Waste in an Unsaturated Environment
An experimental program is described wherein the effect of important independent variables on glass reaction under conditions that may exist for unsaturated storage is examined. The effect...
Development of a Structural Model to Analyze Public Opinion on a High-Level Radioactive Waste Facility
Studies show that Nevada residents and state officials oppose the proposed high-level radioactive waste repository project at Yucca Mountain. Nevada residents view the Yucca Mountain repository...
Field Investigations for Seismic Effects on Mechanical and Geohydrologic Response of Underground Structures in Jointed Rock
An exploratory Seismic Rock Mechanics research program has been initiated by the U.S. Nuclear Regulatory Commission at the Center for Nuclear Waste Regulatory Analyses (CNWRA) to study...
Potential Uses of Lead in Nuclear Waste Disposal
In order for lead to be considered as a nuclear waste packaging material, it must be shown that it has adequate corrosion resistance, and that it does not degrade the properties of other...
Research Program to Develop and Validate Conceptual Models for Flow and Transport Through Unsaturated, Fractured Rock
As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical...
The Adoption of Mechanized Excavation Techniques for the Superconducting Super Collider
The Superconducting Super Collider (SSC) is the latest and largest in a line of high-energy physics accelerator projects. The five increasingly energetic accelerators which make up the...
Principles of the NATM and Other Uses of the Geologic Monitoring Techniques
The NATM (New Austrian Tunneling Method) differs in several respects from other construction methods. Also referred to as the 'sequential support method' or the...
Risk Assessments for the Design of Subsurface Openings
A probabilistic approach was introduced to assess the risk of structural instability due to rock joint systems in rock mass, where subsurface openings are excavated, such openings as shafts,...
Return to search