Analysis and Design of Structures with Outrigger Arms
Although sophisticated computer methods are available for analyzing an entire building structure, there is a need for simplified methods (a) for checking the accuracy of the computer analyses,...
Verification of Approximate Methods of Structural Analysis
Sophisticated computer programs for the determination of the effects of instability on the inelastic stress resultants in steel structures will appear to be 'black boxes'...
Certifying the TN-BRP and TN-REG Transportable Storage Demonstration Casks
The U.S. Department of Energy (DOE) has obtained U.S. Nuclear Regulatory Commission (NRC) certification to transport two transportable storage casks for a demonstration project. Because...
Development of the GA-4 and GA-9 Legal Weight Truck Spent Fuel Shipping Casks
General Atomics (GA) is developing two legal-weight-truck spent-fuel shipping casks for transporting commercial reactor spent fuel. The GA-4 pressurized-water-reactor (PWR) and the GA-9...
High-Capacity, High-Strength Trailer Designs for the GA-4/GA-9 Casks
General Atomics (GA) is developing final designs for two dedicated legal-weight trailers to transport the GA-4 and GA-9 Spent-Fuel Casks. The basic designs for these high-capacity, high-strength...
Design Control Process Requirements for Geologic Repository Operations Area Design
This paper outlines U.S. Nuclear Regulatory Commission's (NRC's) key regulations applicable to U.S. Department of Energy's (DOE's) design...
Strain Distribution in Fault Zones and Fluid Flow
Field and laboratory studies have shown that mechanical shearing in fault zones produces a repeatable fabric that changes with increasing shear strain. In the brittle field of mechanical...
Computer-Assisted Geometric and Kinematic Analysis of Subsurface Faulting in the Vicinity of Yucca Mountain, Nevada, Using Balanced Geologic Cross Sections
Computer-assisted geological cross section balancing methods are used in the geometric and kinematic analysis of subsurface structures in the vicinity of Yucca Mountain, Nevada, including...
Interpretation and Modelling Process of Bedrock Structures for Site Evaluation in Finland
The repository site for the final disposal of spent nuclear fuel in Finland will be selected by the end of the year 2000. Preliminary site investigations have been made in five areas since...
Design and Operating Criteria of the French Deep Repository for High Level Radioactive Waste
The design and operating criteria of the French geologic repository for high level radioactive waste (HLW) were selected for their contribution to operational and long-term safety, as...
Microwave Measurements of the Water Content of Bentonite
The theory of operation of microwave coaxial resonators is described. Sample preparation and the application of resonator techniques to the measurement of the permittivity (dielectric...
An Approach to Evaluate the Sufficiency of Highway Bridges for Nuclear Spent Fuel Transportation
The transportation of radioactive spent fuel can have a significant impact on bridge structures located on designated routes. Due to the critical nature of the cargo and because of the...
Disposal of Vitrified Waste in an Unsaturated Environment
An experimental program is described wherein the effect of important independent variables on glass reaction under conditions that may exist for unsaturated storage is examined. The effect...
Development of a Structural Model to Analyze Public Opinion on a High-Level Radioactive Waste Facility
Studies show that Nevada residents and state officials oppose the proposed high-level radioactive waste repository project at Yucca Mountain. Nevada residents view the Yucca Mountain repository...
Field Investigations for Seismic Effects on Mechanical and Geohydrologic Response of Underground Structures in Jointed Rock
An exploratory Seismic Rock Mechanics research program has been initiated by the U.S. Nuclear Regulatory Commission at the Center for Nuclear Waste Regulatory Analyses (CNWRA) to study...
Effect of a Low-Permeability Layer on Calculated Gas Flow at Yucca Mountain
Yucca Mountain is being studied to determine its suitability as a location for a high-level nuclear waste repository. The mountain is a steep-sided linear ridge which is underlain by a...
Research Program to Develop and Validate Conceptual Models for Flow and Transport Through Unsaturated, Fractured Rock
As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical...
The Adoption of Mechanized Excavation Techniques for the Superconducting Super Collider
The Superconducting Super Collider (SSC) is the latest and largest in a line of high-energy physics accelerator projects. The five increasingly energetic accelerators which make up the...
Principles of the NATM and Other Uses of the Geologic Monitoring Techniques
The NATM (New Austrian Tunneling Method) differs in several respects from other construction methods. Also referred to as the 'sequential support method' or the...
Risk Assessments for the Design of Subsurface Openings
A probabilistic approach was introduced to assess the risk of structural instability due to rock joint systems in rock mass, where subsurface openings are excavated, such openings as shafts,...
Return to search