Sedimentation in Small Hydropower Reservoirs
Small-scale hydropower projects, which usually include reservoirs of limited size, may inherently incorporate severe sedimentation problems. The ratio of reservoir volume to sediment inflow...
Research in Hydraulics at California Institute of Technology
Activities are centered in the W. M. Keck Laboratory of Hydraulics and Water Resources. Research projects active at the Laboratory reflect a continuing commitment to traditional areas...
Current Research in Hydraulics at the Corps of Engineers Waterways Experiment Station
Ongoing activities in hydraulics research at the U. S. Army Engineer Waterways Experiment Station are described. The various areas in which research is under way are enumerated. Activities...
Plastic and Other Limit State Methods for Design Evaluation
These proceedings consist of seven papers dealing with the topic of the design of complex structures using limit state methods. The emphasis is on the role of plastic or limit load techniques....
Sedimentation Consolidation Models?Predictions and Validation
In very soft sediments, questions have arisen concerning the capability of standard computational techniques used to implement calculations. The problems mainly lie in the manner in which...
Structural Engineering in Nuclear Facilities
The papers in this publication cover the general theme of civil and structural engineering as they are applied to nuclear facilities. Traditional topics include seismic analysis, impactive...
Guidelines for Transmission Line Structural Loading
Procedures are provided for the selection of design loads and load factors based on the latest research and state-of-the-art design techniques. This selection has an effort on the reliability...
Building on Air
Copley Place, a $500 million hotel/retail/office/residential complex, was built on air rights over the Massachusetts Turnpike and an adjacent railroad in Boston. Two hotels occupy land...
Geotechnically Allowable Stress for Driven Piles
There are opposing opinions on what value to use for allowable stress in driven steel piles. The key is that two types of stress must be considered: the structurally allowable stress,...
Measurement of Hydrographic Parameters in Large Sand-Bed Streams from Boats
This report concentrates on the state-of-the-art in the field documentation of the existing channel geometry, plus the concurrent stream flow and sediment transport characteristics, prevailing...
Recent Developments in Pavement Skid Resistance
As pavements wear, they lose some of their skid resistance. This article discusses some of the leading options for restoring a pavement's skid resistance. The possibilities...
Ports 83
The Ports '83 Specialty Conference, whose theme is Modernization, Upgrading and Repairs, covers considerations in port operations, design and construction due to obsolescence...
Seismic Design of Embankments and Caverns
The papers included in this publication were presented at three symposia on seismicity and seismic design for embankment dams and underground openings. Primary topics for discussion include:...
Design for Ice Forces
Part one of this publication on design for ice forces emphasizes offshore and coastal structures. In this section , seasonal ice conditions typical of offshore and coastal zones are reviewed....
Seismic Response of Buried Pipes and Structural Components
At nuclear power plants there are numerous underground safety-related pipes and structural components which are utilized in the operation of the plant. These underground components provide...
West Coast High-Rise Condo Opts for Ductile Concrete Frame
In the past, the vast majority of high-rise buildings constructed in earthquake prone areas of the West Coast have employed a steel frame. However, recent advances have made it feasible...
River and Lake Ice Processes Relevant to Ice Loads
Ice effects on engineering structures in inland waters are more widespread than generally appreciated. Troublesome ice conditions can be expected regularly north of the 0 degree C January...
Measurement of Ice Forces on Structures
Methodologies and techniques are discussed for measuring ice forces on fixed structures situated in rivers and lakes. The usual method of measuring ice forces is to place a load frame...
Design of Bridges for Ice Forces
Sources of knowledge on ice forces and ice effects on bridges are listed and discussed briefly. Comments are made on experience of damage by ice and on the influence on bridge costs of...
Australian Coal Terminal Operates Happily Beside Residential Area
A coal terminal was built in Port Kembla, Australia at a $7.56 cost per metric ton. The port was built for $121 million, $18 million below estimate. It included such innovations as the...
Return to search