Three-Dimensional Model of a Stratified Estuary?St. Andrew Bay System, Florida
A three-dimensional modal is applied to a northwest Florida estuary to provide the initial insights into the circulation and flushing patterns of the system. The model, developed by the...
Microcomputer Applications in Transportation III
This proceedings consists of papers presented at the International Conference on Microcomputers in Transportation which was held on June 21-23, 1989 in San Francisco, California. They...
OTEC's subsurface discharges of Deep Ocean Water: Modelling Their Effects on the Primary Production
The French project of a shore-based OTEC pilot plant (5 MW) at Tahiti gave the opportunity of simulating the ecological effects of a small, man-made upwelling in coastal-tropical oligotrophic...
Overview: Steam-Water Phase Change in OTEC Systems
This paper presents an overview of the thermodynamics and the heat and mass transfer processes occurring in OTEC systems utilizing seawater as the working fluid....
Seawater Experimental Results of Direct-Contact Condensation for OC-OTEC Applications
Tests of a direct-contact condenser (DCC) for open-cycle ocean thermal energy conversion systems (OC-OTEC) have been conducted using seawater and exchanging up to 1.25 MWth...
A Semi-Empirical Model for an OC-OTEC Spout Flash Evaporator
A phenomenological model for the thermal-hydraulics of a spout flash evaporator is presented in this paper. The model considers the two-phase flow behavior both in the spout and in the...
Noncondensable Gas Composition and Outgassing Rates in the Open-Cycle OTEC System with Direct-Contact Condensation
This paper will present the results of recent measurements of noncondensable release from an open-cycle ocean thermal energy conversion (OC-OTEC) system in a direct-contact condensation...
Experimental Investigation of Condensation of Steam in the Presence of Noncondensable Gases for Open-Cycle Surface Condensers
Two experimental investigations are being carried out for determination of the effects of noncondensable gases on the rate of condensation in the open-cycle surface condenser. A single-channel...
Decayed Timber Bridge Microcomputer Rating Program
National Bridge Inspection Standards (NBIS) require that capacity ratings for each bridge structure be established. This requirement includes timber bridges which are often decayed, have...
Reliability Assessment of Wood Components
Considerable progress has been made in the nondestructive evaluation (NDE) of wood components since the introduction of the first concepts more than twenty-five years ago. New stress wave...
Wood Variability Effects in Structural Assessment
Engineers evaluating the load carrying capacities of in-service wood structures commonly determine the strength and stiffness properties of structural wood members by various assessment...
Iterative Global/Local Finite Element Analysis
In spite of the advances in computer technology, there is still a need for more computationally efficient methods for performing stress analysis. One approach which is receiving increasing...
SHRP Program: Asphalt Durability and Specification
The goals of the Strategic Highway Research Program (SHRP) program are an improved specification for asphalt binders and accelerated performance tests that can be employed by user agencies...
Long-Term Performance Reliability of Wood Materials
The United States faces a major task in maintaining and rebuilding the nation's infrastructure in the 1990's and beyond. Economic constraints have limited funds...
Applications of X-Ray Imaging in Soil Mechanics
This paper presents a summary of the principles of methods to observe the detailed patterns of local deformation within a soil mass: stereophotogrammetry, polaroscopy, infrared tomography...
Development of a Plane-Strain Device for Soft Rock
Work is now in progress to build a plane-strain apparatus for 'soft' (unconfined compressive strenghts below 35 MPa) rock and concrete, based upon a passive,...
Combined Compression-Shear Experiments on Mortar-Aggregate Interfaces
Material interfaces between matrix and aggregate particles in cementitious composites such as concrete are considered to be a very important component of the material microstructure, which...
Rate Effects in the Deformation of Rocks
This paper gives a brief review of creep and rate effects on the behavior of rocks, within a wide range of confining pressures and temperatures, and with a special emphasis on the physical...
Premature Failures of Outdoor Masonry Pavements
The authors have investigated and repaired a number of premature inservice failures of masonry paving systems in recent years. These systems have become common, built over underground...
Performance of Latex-Modified Thin-Set Mortars in Applications of Thin-Brick Veneer
The use of field-applied polymer-modified mortars for adhering thin brick or tile to building exteriors has become increasingly common in the last decade. The latex-modified mortars can...
Return to search