In-Situ Calibration of USGS Piezometer Installations
Among the few potentially liquefiable sites around the world that have been permanently instrumented with pore-pressure transducers and accelerometers, only the Wildlife Site in the Imperial...

Electronic Data Acquisition and Analysis for Soil Dynamics Applications
Recent advances in micro-computer-based data acquisition hardware and software systems have created a window of opportunity for the soil dynamics specialist. Increases in the number of...

Use of Bender Elements in Soil Dynamics Experiments
Transducers employing piezoelectric bender elements have been found to be versatile sources and receivers of small-amplitude shear waves, with multiple potential applications. The constitutive...

Use of Piezoceramic Bender Elements in Soil Dynamics Testing
The use of piezoceramic bender elements is described to measure small strain, shear wave velocity distributions in soil models used in centrifuge and shake table testing. Experimental...

Flawed Assumptions: Why Bridge Deck Joints Fail
Engineers should continually examine, evaluate and improve their representations of reality to avoid basing their beliefs, decisions, practices and policies on flawed assumptions. Such...

Mechanics Computing in 1990's and Beyond
This proceedings, Mechanics Computing in 1990's and Beyond, consists of extended abstracts of the papers presented at the Engineering...

San Francisco Double-Deck Viaduct Retrofits
Following the Loma Prieta Earthquake in October 1989, six double-deck reinforced concrete viaducts in San Francisco were closed because of some isolated damage, and as a precaution for...

Screening Procedures for the Retrofit of Bridges
Since the October 1989 Loma Prieta Earthquake in Northern California, interest has revived in seismic criteria for both new design and the retrofit of existing highway bridges. This interest...

Tension Bending Behavior of Buried Pipelines Under Large Ground Deformations in Active Faults
This paper deals with the tensile failure of buried pipelines subject to abrupt fault movements. The pipe is modeled as a thin cylindrical shell which is essentially semi-infinite. The...

Seismic Behavior of Buried Pipelines Through Field Observation
This paper presents seismic response characteristics of embedded pipes based on field measurements. Strains induced in steel pipe and ductile pipes with expansion joints are studied. Special...

Seismic Hazard Along a Crude Oil Pipeline in the Event of an 1811-1812 Type New Madrid Earthquake
This paper presents an assessment of the seismic hazard that exists along a major crude oil pipeline (pipeline 22). An 1811-1812 type New Madrid earthquake with moment magnitude 8.2 is...

Design of Substation Foundations for Liquefaction
When substation foundations penetrate liquefiable strata within risk prone seismic regions, the potential loss of support must be evaluated with state-of-the-art methods to determine foundation...

A Study of Shield Tunnel's Earthquake Prevention Under a Big Earthquake
Currently, the most commonly used approach for determining the aseismicity of a shield tunnel is the 'Response Displacement Method.' This is based on analysed...

A Study of Liquefaction Countermeasures for Manholes Under the Pavement
The gravel drain method has proven to be an effective countermeasure for underground structures in liquefying ground. However, due to the road pavement, there is no draining passage through...

Restrained Underground Piping?Some Practical Aspects of Analysis and Design
This paper is a brief update of stress analysis techniques published earlier [1] to aid the analyst in qualifying continuous welded steel buried pipelines that are subject to seismic soil...

Seismic Analysis and Design of Buried Piping
Among the causes of damage to buried pipelines due to earthquakes, the one that is most complicated to analytically deal with and that is most credible at safety related sites such as...

Earthquake Response of Liquid-Filled Pipeline at Finite Depth Below Ground Surface
This paper deals with the problem of earthquake response analysis of pipelines, empty or fully filled with liquid and buried at a finite depth below the ground surface. Emphasis is placed...

Finite Element Analysis of Three-Way Joint of Buried Pipelines Under Earthquake Loads
A quasi-static finite element procedure for the stress analysis of three-way joint of buried pipelines under earthquake loads has been established by quasi-conforming thin circular cylindrical...

Seismic Analysis of Buried Pipelines Subjected to Vertical Fault Movement
Earthquakes have demonstrated the vulnerability of buried pipelines, mainly to 'non-dynamic' seismic deformations of the ground, such as liquefaction, landslide...

Evaluation of Earthquake Resistance of Buried Continuous Pipelines at Bent Parts
Small diameter pipelines are susceptible to damage at bends due to large seismic ground displacements. The 'Deformability Index' is defined as the earthquake...

 

 

 

 

Return to search