Lake Water Level and Sediment Management?Case Studies in Illinois
Estimation of the sedimentation in the lake is based on the soil erosion rates in the watershed, the sediment transport in the stream system, and lake trap efficiency. Erosion rates are...
Analyses of Sediment Transport Data by Microcomputer Software
The MINITAB statistical software project has been popularly used on mainframe computers since 1972. In June 1984, a subset of the program was made available for the IBM-PC microcomputer;...
Explicit Hydraulic Modeling of Sedimentation Transients in Alluvial Channels
An explicit finite difference numerical scheme is used in this study to model sediment transients in alluvial channels. The governing equations are momentum equation and continuity equation...
Assessment of Sediment Problems in Peoria Lake, Illinois
Peoria Lake, located on the Illinois River in Illinois, is the deepest lake in the river valley. Since 1903, the lake has experienced approximately a 31% loss of original storage capacity...
Water Supply Intake Structures on Western Rivers
Many of the problems experienced with water supply intake structures on western rivers result from a failure to mitigate the effects of moving sediments. Shallow but varying flow depths...
Automation of a River Model
The U. S. Army Engineer Waterways Experiment Station (WES) has used physical models to study sedimentation problems since 1931. With the recent advent of new technology, it was realized...
Data Acquisition in USACRREL'S Flume Facility
A computerized data acquisition system has been developed that is based on a Hewlett-Packard 9845B desktop computer. The system allows determination of highly accurate water temperatures,...
Three-Dimensional Simulation of Flow, Salinity, Sediment, and Radionuclide Movements in the Hudson River Estuary
The three-dimensional, finite difference model FLESCOT was applied to a 106-km reach of the Hudson River estuary in New York between Chelsea and the mouth of the river. It predicted the...
A Microcomputer Program for River Sedimentation
Erosion and deposition of sediment in rivers causes numerous problems. In order to describe this process, both the hydraulic properties of the river and the mechanics of sediment transport...
Data Acquisition and Analysis of Pressure Fluctuations in Hydraulic Jumps
The paper reports on a study to procure basic data on large pressure fluctuations in hydraulic jump stilling basins. Interest in pressure fluctuations relates to: the effect of dynamic...
Transients in Empty Pipes Subject to Rapid Filling
A mathematical model was developed to simulate the pipe filling process and the pipe forces based on incompressible water column theory. The method easily accomodates appropriate boundary...
SWRRB.80: A Basin Scale Model for Microcomputers
The SWRRB (Simulator for Water Resources on Rural Basins) model was developed by the USDA Agricultural Research Service to simulate the daily stream flow, and sediment loads from agricultural...
Littoral Environment Observation Program
This paper presents a method for determining the longitudinal, transverse, and vertical dispersivities of a thick aquifer for a free convection tracer test using only measurements from...
Investigation of Design Criteria for APM Guideways
Designers have relied mostly on the provisions of the American Association of State Highway and Transportation Officials (AASHTO) Standard Specifications for Highway Bridges. Sometimes...
A New Alternative in Steel Construction?Partially Restrained Connections
Lack of formal training in methods as well as the lack of specific guidelines have limited the understanding and utilization of semi-rigid connection technology. A renewed interest in...
The Effect of Connection Flexibility on Steel Members and Frame Stability
With the advent of Load and Resistance Factor Design (LRFD) and the many existing moment-rotation curves for connections, the use of actual connection flexibility in the design process...
Buckling of Flexibly-Joined Simple Frames
A nonlinear analysis of plane elastic frames is presented. The static loading consists of both eccentric concentrated loads (near the joints) and uniformly distributed loads on all or...
An In-Plane Finite Element Model for Brick Masonry
A finite element model for brick masonry is reported. The model takes account of non linear deformations and progressive local failure. The failure may occur in the joints alone or in...
Behavior of Cavity Masonry Walls Under Out-of-Plane Lateral Loading: An Analytical Approach
In this paper, a finite element model is used to analyze cavity walls in an attempt to understand their complex behavior and to evaluate the adequacy of the assumptions embodied in the...
Shear Design of Masonry Walls
The paper presents a summary of a research project carried out at the Swiss Federal Institute of Technology Zurich to develop a design method based on the ultimate strength of masonry...
Return to search